00197498-03_UM_SiplaceCA-Serie_EN - 第470页
8 Station Extensions User manua l SIPLACE CA-Series 8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT 470 8.1.4.2 Assembly The nozzle changer is fixed to the COT insert. 8 Fig. 8.1 - 19 Assembl…
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
469
8.1.4.1 Technical Data
8
Nozzle Changer for the SIPLACE TwinHead
Dimensions (length x width x height) 448 x 68 x 49 mm³
Number of magazines Max. 12
Number of nozzle holders Max. 24 standard nozzles
Max. 12 special nozzles
Nozzle types 5xx, standard
4xx with adapter
9xx with adapter
Nozzle changeover time Approx. 2s per nozzle
8 Station Extensions User manual SIPLACE CA-Series
8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT
470
8.1.4.2 Assembly
The nozzle changer is fixed to the COT insert.
8
Fig. 8.1 - 19 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
8
Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
471
8.1.4.3 Functions
The magazine for standard nozzles has one position fiducial for position recognition, while the
magazine for special nozzles/grippers has two. The nozzles are fixed with balls in the garage. The
nozzles are either clamped or released for removal, depending on the direction of DP axis rotation.
8
Fig. 8.1 - 20 Magazine for standard and special nozzles
(1) Standard magazine
(2) Position fiducial
(3) Nozzle garage
(4) Magazine for special nozzles and grippers
(5) Nozzle garage
(6) Balls for fixing nozzles
8.1.4.4 Nozzle Changer 2 for the TwinStar
Item no. 00119717-xx Nozzle changer 2, TwinStar
This nozzle changer can accommodate up to 10 nozzle magazines. All other technical data are
identical with the 1st nozzle changer.