00197498-03_UM_SiplaceCA-Serie_EN - 第57页
User Manual SIPLACE CA-Series 2 Operational Safety From software version SC.708.0 Edition 12/20 14 EN -DRAFT 2.2 Warning Labels on the Placement Machine 57 2.2.8 W arning Label W208 "Laser Class 2" on PCB Conve…
2 Operational Safety User Manual SIPLACE CA-Series
2.2 Warning Labels on the Placement Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT
56
2.2.7.2 Warning Label W207 on the Inrush Current Limiter of the Power Supply
2
Fig. 2.2 - 10 Warning label W207 on the inrush current limiter of the power supply
Item W207 [03009346-01]
PCB1 board, inrush current limiter - transformer
PCB2 board, inrush current limiter - servo
PCB2
PCB1
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.2 Warning Labels on the Placement Machine
57
2.2.8 Warning Label W208 "Laser Class 2" on PCB Conveyor
2
Item W208 "laser class 2" on PCB conveyor in fig. 2.2 - 11 [03009347-01]
(quantity per machine: 4 for the dual conveyor, 2 for the single conveyor)
2
2
2
Fig. 2.2 - 11 Danger Sign W208 "Laser Class 2" at the PCB Conveyor
Item W208 [03009347-01]
2
2
LASER RADIATION!
Do not look into beam
Laser Class 2
2 Operational Safety User Manual SIPLACE CA-Series
2.2 Warning Labels on the Placement Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT
58
2.2.9 Warning Label W211 on CEKON Plug
2
Item W 211 in fig. 2.2 - 12 (quantity per machine: 1)
2
Fig. 2.2 - 12 Warning label W211 on CEKON plug
Item W211 [03009351-01]
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious in-
jury. Avoid contact with power plug and/or wire ends for 30 seconds