00197498-03_UM_SiplaceCA-Serie_EN - 第59页
User Manual SIPLACE CA-Series 2 Operational Safety From software version SC.708.0 Edition 12/20 14 EN -DRAFT 2.2 Warning Labels on the Placement Machine 59 2.2.10 W arning Label W209 on the EMERGENCY STOP Buttons 2 W209 …
2 Operational Safety User Manual SIPLACE CA-Series
2.2 Warning Labels on the Placement Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT
58
2.2.9 Warning Label W211 on CEKON Plug
2
Item W 211 in fig. 2.2 - 12 (quantity per machine: 1)
2
Fig. 2.2 - 12 Warning label W211 on CEKON plug
Item W211 [03009351-01]
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious in-
jury. Avoid contact with power plug and/or wire ends for 30 seconds
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.2 Warning Labels on the Placement Machine
59
2.2.10 Warning Label W209 on the EMERGENCY STOP Buttons
2
W209 in fig. 2.2 - 13 [03009349-01] (quantity per machine: 2)
2
2
Fig. 2.2 - 13 Warning label W209 on the EMERGENCY STOP buttons
Item W209 [03009349-01]
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
For Australia, Canada, Mexico and USA, warn-
ing label W209 is affixed to the extension kit in-
stead of the yellow ring on the EMERGENCY
STOP buttons.
2 Operational Safety User Manual SIPLACE CA-Series
2.2 Warning Labels on the Placement Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT
60
2.2.11 "Head crash" label on the IC camera of the TwinHead
"Head crash" label in fig. 2.2 - 14 [03015392-02] (quantity per machine: maximum 4)
2
Fig. 2.2 - 14 "Head crash" label on the IC camera of the TwinHead
(1) "Head crash" label on the IC camera of the TwinHead
WARNING RISK OF HEAD CRASH 2
During a placement head changeover from a TwinHead to a Col-
lect&Place head,the Collect&Place head collides with the camera
housing. Dismantle the stationary component cameras (stationary
P&P, type 33, 55 x 45, and type 25, 16 x 16) for the TwinHead.