00197498-03_UM_SiplaceCA-Serie_EN - 第62页
2 Operational Safety User Manual SIPLACE CA- Series 2.3 Warning Labels on the SWS From software version SC.708.0 Edition 12/2014 EN -DRAFT 62 2.3.2 W arning Label on the SI PLACE SWS W afer Stretcher 2 2 Fig. 2.3 - 2 Waf…
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.3 Warning Labels on the SWS
61
2.3 Warning Labels on the SWS
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant
to water and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.2
2
2.3.1 Warning Label W204 on the Wafer Support
Fig. 2.3 - 1 Warning label W204 danger of crushing on the gap in the side panel
WARNING
Damage to warning labels!
The warning labels can be damaged or destroyed by abrasive cleaning agents or sol-
vents.
Do not use abrasive cleaners or solvents for cleaning warning labels.
Replace any damaged or illegible warning labels.
2
2
2
DANGER OF CRUSHING!
Reaching in here could lead to injuries to the arms and hands.
Do not reach into the machine while it is running
2 Operational Safety User Manual SIPLACE CA-Series
2.3 Warning Labels on the SWS From software version SC.708.0 Edition 12/2014 EN -DRAFT
62
2.3.2 Warning Label on the SIPLACE SWS Wafer Stretcher
2
2
Fig. 2.3 - 2 Wafer support with SIPLACE SWS Wafer Stretcher
See also section 4.5 on page 235.
CAUTION
Risk of burns due to high temperatures!
The heating can reach temperatures of up to 60°C.
Do not reach into the area around the fan with your hands.
Be careful when touching the wafer support.
1
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.3 Warning Labels on the SWS
63
2.3.3 Warning Label W201 Safe Operation of Machine SWS
2
2
Fig. 2.3 - 3 W201 [03009338-01] safe operation of machine on SWS (quantity per SWS: 1)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on
the operator being familiar with the user manual and
safety instructions and putting them into effect.