00197498-03_UM_SiplaceCA-Serie_EN - 第68页
2 Operational Safety User Manual SIPLACE CA- Series 2.5 Safety Instructions for Transportation From software version SC.708.0 Edition 12/2014 EN -DRAFT 68 2.4.3 Laser Class 2 The following modules are assigned to laser c…
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.4 Laser Classification
67
2.4 Laser Classification
2.4.1 Laser Class 1
2.4.1.1 Classification of the Whole Machine
2
2
2.4.1.2 Classification of the Camera Systems
2
2.4.2 Laser Class 1M
Do not look directly at this with optical instruments!
2
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
All installed camera systems and the whole machine when ready
for operation are assigned to laser class 1.
The laser classes are determined according to DIN EN 60825-
1:2001
2
The following camera systems are assigned to laser class 1:
– PCB camera multicolor, type 24, digital
– Component cameras
Stationary component camera P&P, type 33, 55 x 45, digital (
Stationary component camera P&P, type 25, 16 x 16, digital
2
The following camera systems are assigned to laser class 1M:
– Component camera C&P, type 41, 6 x 6 on the SIPLACE SpeedStar
(C&P20 M)
– Component camera C&P, type 30, 27 x 27 on MultiStar
2 Operational Safety User Manual SIPLACE CA-Series
2.5 Safety Instructions for Transportation From software version SC.708.0 Edition 12/2014 EN -DRAFT
68
2.4.3 Laser Class 2
The following modules are assigned to laser class 2:
– Laser light barrier, placement area 1 in the PCB conveyor
– Laser light barrier, placement area 2 in the PCB conveyor
– PCB barcode scanner
– Component sensor on the SIPLACE SpeedStar (C&P20 M)
– Component sensor on MultiStar (CPP)
2
2.5 Safety Instructions for Transportation
2.5.1 Transporting the Placement Machine
2
Use a fork-lift truck with the following specification to carry the machine:
Fork length:Min. 1800 mmCarrying power:Min. 6000 kgClear width between forks:Min. 350
mm 2
2
2
Laser radiation
Do not look into beam!
WARNING
Risk of tilting!
Risk of tilting, if the required specifications for the fork-lift truck are not observed.
Only use the specified fork-lift for transportation.
Transportation of the machine is described in section 5.2
, page 257.
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.5 Safety Instructions for Transportation
69
2.5.2 Transporting the SWS
2
The SWS can be transported using a suitable hand lift with the following specifications:
Carrying power 1000 kg at least
Fork length 1000 mm at least
Distance between the forks 300 at least, 520 mm at most (outer dimension) 2
2
WARNING
Risk of tilting!
There is a risk of the SWS tilting if the required specifications for the fork-lift truck are not
observed.
Only use the specified fork-lift for transportation.
Transportation of the SWS is described in section 5.3
, page 266.
PLEASE NOTE
Hand lift specifications
The necessary width of the fork lift presents a critical measure.
Make sure that the hand lift used fulfills the specified requirements.