00191494-01 - 第108页

Error Messages Short Reference SIPLACE 80 S-15/F3/G 03/99 Issue Software Version SR.010.x x 106 1096 Z-axis error; GU1: limit switc h actuated CAUSE ● The axis is located at th e limit switch or limit switch wa s actuate…

100%1 / 124
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
105
1090 Z-axis error; GU2: undefined position type
CAUSE
● Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
● Check machine data
1091 Z-axis error; GU3: undefined position type
CAUSE
● Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
● Check machine data
1092 X-axis error: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1093 Y-axis error: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1094 xk-axis error: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1095 yk-axis error: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
106
1096 Z-axis error; GU1: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1097 Z-axis error; GU2: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1098 Z-axis error; GU3: limit switch actuated
CAUSE
● The axis is located at the limit switch or limit switch was actuated
REMEDY
● Slide the axis away from the limit switch and re-reference; switch the machine off and back on
again
1099 X-axis error: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1100 Y-axis error: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1101 xk-axis error: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1102 yk-axis error: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
107
1103 Z-axis error; GU1: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1104 Z-axis error; GU2: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1105 Z-axis error; GU3: Target position outside of travel range
CAUSE
● Program error; should not occur
REMEDY
●
1106 X-axis error: incorrect character
CAUSE
● Program error; should not occur
REMEDY
●
1107 Y-axis error: incorrect character
CAUSE
● Program error; should not occur
REMEDY
●
1108 xk-axis error: incorrect character
CAUSE
● Program error; should not occur
REMEDY
●
1109 yk-axis error: incorrect character
CAUSE
● Program error; should not occur
REMEDY
●