00191494-01 - 第29页
Short Reference SIPLACE 80 S-15/F3/G Error Messages 03/99 Issue Software Version SR.010.x x 27 277 VS: Check sum error during data tr ansmission CAUSE ● Communications error REMEDY ● If the error reoccurs with furthe r a…
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
26
268 Undefined reference point type
CAUSE
● Axis board defective; local machine data incorrect; error should not occur.
REMEDY
● Fit new axis board.
269 Acceleration/deceleration too great
CAUSE
● Axis board defective; local machine data incorrect; error should not occur.
REMEDY
● Fit new axis board.
270 PCB interrupted due to EMERGENCY STOP
CAUSE
● The guard was opened or the EMERGENCY STOP button pressed while placement was in pro-
gress.
REMEDY
● Before opening the guard press the STOP switch and wait until the machine stops.
271 Check sum error of coplanarity
CAUSE
● Error in the command to the coplanarity.
REMEDY
● Repeat measurement; check supply voltage; jumper check.
272 Vision system not providing measure result
CAUSE
● No component at the nozzle; component outside tolerance; not enough image information to pro-
vide measurement result.
REMEDY
● Optimize pick-up; check charge (component) .
275 VS: Unknown request
CAUSE
● Incorrect ICOS software version.
REMEDY
● Check eproms and replace if necessary.
276 VS: Data not correct during request
CAUSE
● Incorrect camera number in IDEAL.MA; obsolete ICOS software version.
REMEDY
● Correct the machine data (IDEAL.MA); check eproms and replace if necessary.
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
27
277 VS: Check sum error during data transmission
CAUSE
● Communications error
REMEDY
● If the error reoccurs with further attempts, first reset MVS, then station computer.
278 VS: Reference No. unknown, model not found
CAUSE
● The station refers to a package form or fiducial description which is not loaded in MVS/M10000.
REMEDY
● Load fiducials/package form description from vision system; check camera codes (IDEAL.MA/
REAL.MA).
279 VS: Incorrect parameters during request
CAUSE
● Incorrect camera number in IDEAL.MA; obsolete ICOS software version; FOV (field of view) data
in REAL.MA have too great a value.
REMEDY
● Correct the machine data (IDEAL.MA and REAL.MA); check eproms and replace if necessary.
280 VS: Not enough memory for a window definition
CAUSE
● Memory problems in the ICOS.
REMEDY
● Reset ICOS.
281 VS: Not enough memory for a definition
CAUSE
● ICOS cannot accept any further model descriptions.
REMEDY
● Reset ICOS and reload.
282 VS: Not enough memory for image
CAUSE
● Memory location problems in the ICOS.
REMEDY
● Reset ICOS.
283 Incorrect Eprom version in MVS
CAUSE
● The EPROM version in the MVS cannot be used with the station computer software. (Version dis-
played in the vision menu).
REMEDY
● Replace the EPROM in the MVS.
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
28
284 VS: A request is now being processed
CAUSE
● A request is being processed in the vision system.
REMEDY
● If this error still occurs after numerous attempts, reset ICOS.
285 VS: Request cannot be finished and is being aborted
CAUSE
● The station refers to a package form or fiducial description which is not loaded in MVS/M10000.
REMEDY
● Load fiducials/package form description from vision system; check camera codes (IDEAL.MA/
REAL.MA).
286 VS: Hardware error in vision system (FATAL ERROR)
CAUSE
● Hardware error
REMEDY
● If this error still occurs after numerous attempts, reset ICOS.
287 Coplanarity has received a hardware break
CAUSE
● A hardware break was sent to the coplanarity module.
REMEDY
● Hardware error: check coplanarity module; check M18; check supply voltage of the coplanarity
module.
288 Telegram to coplanarity has no STX
CAUSE
● The first character sent to the coplanarity module is lost.
REMEDY
● Check supply voltage; check jumper; repeat measurement.
292 Communication to vision system defective (Error code -11)
CAUSE
● System error
REMEDY
● Reset system.
293 Communication to vision system defective (Error code -10)
CAUSE
● System error
REMEDY
● Reset system.