00191494-01 - 第4页
Error Messages Short Reference SIPLACE 80 S-15/F3/G 03/99 Issue Software Version SR.010.x x 2
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
1
Error Messages
NOTE
Shortcuts used in the error messages displayed on the screen.
AKT = Update task of the aktuell.ma
BL = PCB barcode reader
BO = User interface
COMP = Component
COPLAN = Coplanarity module
DP = Data processing
EH = Error handler
GK = General coordinator
GU = Glueing unit
KLKONF = Glueing configuration
LR = Line computer
LRR = Line computer receive task
LRS = Line computer transmit task
MA = Machine
MC = Machine controller
MK = Fiducial
NF = Refill function
OPT = Optimization of glueing
PCB = Printed circuit board
PF = Package form
RS = Set-up
SC = Station computer
SF = Single functions
SR = Station computer
SV = Supervisor on machine controller
TA = Test output
VS or VIS = Vision system
WPC = Wafflepack changer
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
2
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
3
Error Messages
1 Arm for turning station 1 does not swivel in
CAUSE
● Component jammed between pinion and gearwheel; proximity switch incorrectly aligned
in hole; swivel-in mechanism stiff; motor defective; bero defective.
REMEDY
● Remove component; adjust sensing distance; carry out maintenance; replace motor.
2 Arm for turning station 1 does not swivel out
CAUSE
● Sensing distance incorrect; proximity switch defective; for further faults see fault no. 1.
REMEDY
● Adjust sensing distance; for further remedial measures see fault no. 1.
3 D1-axis does not reach setpoint position
CAUSE
● Greasy; motor with tacho defective; rotational movement of the sleeve in the segment stiff.
REMEDY
● Clean friction wheel; replace motor with tacho and belt wheel and check axis calibration; replace
segment.
6 Arm for turning station 2 does not swivel in
CAUSE
● Component jammed between pinion and gearwheel; proximity switch incorrectly aligned
in hole; swivel-in mechanism stiff; motor defective.
REMEDY
● Remove component; adjust sensing distance; carry out maintenance; replace motor.
7 Arm for turning station 2 does not swivel out
CAUSE
● Sensing distance incorrect; proximity switch defective; for further faults see fault no. 6.
REMEDY
● Adjust sensing distance; for further remedial measures see fault no. 6.
8 D2-axis does not reach setpoint position
CAUSE
● O-ring drive belt greasy; motor with tacho defective; rotational movement of the sleeve in the seg-
ment stiff.
REMEDY
● Clean O-ring and friction wheel; replace motor with tacho and belt wheel and check axis calibra-
tion; replace segment.