00191494-01 - 第41页

Short Reference SIPLACE 80 S-15/F3/G Error Messages 03/99 Issue Software Version SR.010.x x 39 370 Calibration value is out of range (E rror code 48H) CAUSE ● Error during the course of cali bration in the tester. REMEDY…

100%1 / 124
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
38
363 Calibration value is out of range (Error code 41H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
364 Calibration value is out of range (Error code 42H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
365 Calibration value is out of range (Error code 43H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
366 Calibration value is out of range (Error code 44H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
367 Calibration value is out of range (Error code 45H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
368 Calibration value is out of range (Error code 46H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
369 Calibration value is out of range (Error code 47H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
Short Reference SIPLACE 80 S-15/F3/G Error Messages
03/99 Issue Software Version SR.010.xx
39
370 Calibration value is out of range (Error code 48H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
371 Calibration value is out of range (Error code 49H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
372 Calibration value is out of range (Error code 4AH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
373 Calibration value is out of range (Error code 4BH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
374 Calibration value is out of range (Error code 4CH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
375 Calibration value is out of range (Error code 4DH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
376 Calibration value is out of range (Error code 4EH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
Error Messages Short Reference SIPLACE 80 S-15/F3/G
03/99 Issue Software Version SR.010.xx
40
377 Calibration value is out of range (Error code 4FH)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
378 Calibration value is out of range (Error code 50H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
379 Calibration value is out of range (Error code 51H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
380 Calibration value is out of range (Error code 52H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
381 Calibration value is out of range (Error code 53H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
382 Calibration value is out of range (Error code 54H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.
383 Calibration value is out of range (Error code 55H)
CAUSE
● Error during the course of calibration in the tester.
REMEDY
● If electrical measuring is not possible, reset station; if resetting does not work, replace tester.