80S-20贴片机 - 第338页
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual 9.9 12x Nozzle Cha nger Edition 07/97 9 - 42 5H SOD FLQJ WKH : D\ 9 DO Y H 6SDUHS DUWV – 5/2-way valve with base p late a nd cable, item …
SIPLACE 80S-20/F4 Service Manual 9 12-Segment Revolver Head (10000)
Edition 07/97 9.9 12x Nozzle Changer
9 - 41
.H\WR)LJ
1 Supporting rail
2 Cylinder fixing screws
3 Valve block fixing screws
4 Nozzle changer control board
5 Control cable plug
65/2-way valve
7 Connections for the cylinder connecting hoses
8 Cylinder
9 Control board fixing screws
10 Reject station fixing screws
11 Complete reject station
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual
9.9 12x Nozzle Changer Edition 07/97
9 - 42
5HSODFLQJWKH:D\9DOYH
6SDUHSDUWV
– 5/2-way valve with base plate and cable, item no. 00317578-02
7RROV
– Hexagon socket-head spanners, size 2.5 and 3
6WHSVIRU5HPRYLQJWKH:D\9DOYH
● Remove the nozzle changer from the machine as described in section 9.9.1.
● Remove the connecting cable between the 5/2-way valve and plug X2 on the control board.
● Loosen the screws connecting the compressed air lines to the cylinder (see Fig. 9.9.3, item 7).
● Remove the compressed air hoses from the 5/2-way valve to the cylinder. When you do this, mark which
hose is assigned to which connection.
● Remove the middle magazine of the seven magazines as described in section 9.9.3.1.
● Loosen the 2 M4x16 screws (see Fig. 9.9.3, item 3).
● Remove the 5/2-way valve.
6WHSVIRU,QVWDOOLQJWKH:D\9DOYH
● Insert the 5/2-way valve in the nozzle changer.
● Fix the 5/2-way valve using the 2 M4x16 screws (see Fig. 9.9.3, item 3).
● Connect the compressed air hoses to the cylinder at the associated connections on the 5/2-way valve.
● Tighten the screws of the compressed air connections.
● Fit the connecting cable between the 5/2-way valve and plug X2 on the control board.
● Install the middle magazine of the seven magazines as described in section 9.9.3.2.
● Install the nozzle changer in the machine as described in section 9.9.2
SIPLACE 80S-20/F4 Service Manual 9 12-Segment Revolver Head (10000)
Edition 07/97 9.9 12x Nozzle Changer
9 - 43
5HSODFLQJWKH&\OLQGHU
6SDUHSDUWV
– Cylinder, item no. 00312789-01
7RROV
– Hexagon socket-head spanner, size 3
6WHSVIRU5HPRYLQJWKH&\OLQGHU
● Remove the nozzle changer from the machine as described in section 9.9.1
● Loosen the screws on the 5/2-way valve connecting the compressed air lines to the cylinder (see Fig.
9.9.3, item 7).
● Remove the compressed air hoses from the cylinder of the 5/2-way valve. When you do this, mark which
hose is assigned to which connection.
● Loosen the 2 M4x16 screws on the angle bracket of the cylinder (see Fig. 9.9.3, item 2).
● Remove the cylinder.
6WHSVIRU,QVWDOOLQJWKH&\OLQGHU
● Insert the cylinder. Make sure that the fork head is positioned in the locator of the sliding plate.
● Using the 2 M4x16 screws, screw the angle bracket of the cylinder to the body of the nozzle changer (see
Fig. 9.9.3, item 2).
● Connect the compressed air hoses to the cylinder at the associated connections on the 5/2-way valve.
● Tighten the screws of the compressed air connections.
● Install the nozzle changer in the machine as described in section 9.9.2.