80S-20贴片机 - 第340页
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual 9.9 12x Nozzle Cha nger Edition 07/97 9 - 44 5H SOD FLQJ WKH5 HMH FW6W DWLRQ 6SDUHS DUWV – Complete reject station 00323 049-01 – Reject s ta…
SIPLACE 80S-20/F4 Service Manual 9 12-Segment Revolver Head (10000)
Edition 07/97 9.9 12x Nozzle Changer
9 - 43
5HSODFLQJWKH&\OLQGHU
6SDUHSDUWV
– Cylinder, item no. 00312789-01
7RROV
– Hexagon socket-head spanner, size 3
6WHSVIRU5HPRYLQJWKH&\OLQGHU
● Remove the nozzle changer from the machine as described in section 9.9.1
● Loosen the screws on the 5/2-way valve connecting the compressed air lines to the cylinder (see Fig.
9.9.3, item 7).
● Remove the compressed air hoses from the cylinder of the 5/2-way valve. When you do this, mark which
hose is assigned to which connection.
● Loosen the 2 M4x16 screws on the angle bracket of the cylinder (see Fig. 9.9.3, item 2).
● Remove the cylinder.
6WHSVIRU,QVWDOOLQJWKH&\OLQGHU
● Insert the cylinder. Make sure that the fork head is positioned in the locator of the sliding plate.
● Using the 2 M4x16 screws, screw the angle bracket of the cylinder to the body of the nozzle changer (see
Fig. 9.9.3, item 2).
● Connect the compressed air hoses to the cylinder at the associated connections on the 5/2-way valve.
● Tighten the screws of the compressed air connections.
● Install the nozzle changer in the machine as described in section 9.9.2.
9 12-Segment Revolver Head (10000) SIPLACE 80S-20/F4 Service Manual
9.9 12x Nozzle Changer Edition 07/97
9 - 44
5HSODFLQJWKH5HMHFW6WDWLRQ
6SDUHSDUWV
– Complete reject station 00323049-01
– Reject station 00323050-02
7RROV
– Hexagon socket-head spanner, size 2.5
6WHSVIRU5HPRYLQJWKH5HMHFW6WDWLRQ
The reject station can be replaced at the integral nozzle changer.
● Loosen and remove the 2 M3x20 screws (see Fig. 9.9.3, item 10).
● Remove the reject unit. It may be difficult to move since it is seated on locating pins.
6WHSVIRU,QVWDOOLQJWKH5HMHFW6WDWLRQ
● Place the reject unit on the locating pins.
● Press down on the reject station until it is lying on the body of the nozzle changer.
● Insert the 2 M3x20 screws into the corresponding holes (see Fig. 9.9.3, item 10).
● Tighten the screws.
❒
Service Manual SIPLACE 80S-20/F4 11Control Unit
Edition 03/97
11 - I
Content
Page
11Control Unit
11.1 Replacing Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
11.1.1 Auxiliary Materials and Equipment Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
11.1.2 Preparatory Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
11.1.3 Replacing the Network Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
11.1.4 Replacing Computer M44 (Machine Controller) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
11.1.5 Replacing the Hard Disk / Floppy Disk Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11.2 Set-Up Configuration of M44 Computer (Machine Controller) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.2.1 Configuration Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.2.1.1 Screen 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.2.1.2 Screen 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.2.1.3 Screen 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.3 Wrap Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9