80S-20贴片机 - 第419页
SIPLACE 80S-20/F4 Service Manual 13 6-Segment Revolver Head (8000) Edition 07/97 13.1 6-Segment Revolver Head (8000) 13 - 5 13.1.4 Structure of the 6-Segment Revolver Head (8000) Fig. 13.1.1 Structure of the 6-segm ent r…
13 6-Segment Revolver Head (8000) SIPLACE 80S-20/F4 Service Manual
13.1 6-Segment Revolver Head (8000) Edition 07/97
13 - 4
– Vacuum distributor (see Section 13.4.4) 00319827S02
– O-ring 8x1 NBR70B 00201179S01
– O-ring 14x1.5 NBR70B (see Section 13.4.1) 00320048S01
– Vacuum nozzle, 1.5 in dia. (see Section 13.4.1) 00319420S02
– Vacuum board SP 6/12 (see Section 13.4.3) 00321216S03
– Connecting unit 00332780-01
– Silencer (see Section 13.4.2) 00320964S01
– Vacuum nozzle (see Section 13.4.1) 00319423S02
– O-ring 10x1.5 NBR70B (see Section 13.4.1) 00320047S01
– O-ring 16x2 E70B (see Section 13.2.4) 00320043S01
– Toothed belt Synchroflex 2.5 T2/90 (see Section 13.2.5) 00320041S01
13.1.2 Spare Parts for Nozzle Changer, 6-Segment Head 8.000
– Magazine for type 7xx nozzles (see Section 13.9.3) 00328843-01
– Magazine for type 8xx nozzles (see Section 13.9.3) 00328842-01
– Reject container 00329696-01
– 5/2-valve with base plate and cable (see Section 13.9.6) 00317578-02
– Control board for nozzle changer (see Section 13.9.5) 00317353-02
– Spring hook (see Section 13.9.4) 00329170-01
– Rotary drive, complete (see Section 13.9.7) 00333110-01
13.1.3 Test Equipment
Designation Item No.
– Distance gauge 00325445-01
– Precision test pin ∅ 1.3 00326163-01
– Precision test pin ∅ 1.4 00326160-01
– Precision test pin ∅ 1.5 00326161-01
– Precision test pin ∅ 1.6 00326162-01
– Gauge for star 00326164-01
– Gauge for Z axis 00331308-01
– Compressed air testing device, complete 00313523-01
– Belt tension measuring device TSM 00326015-01
Instruction manual ’Measuring belt tension’ 00190788-01
SIPLACE 80S-20/F4 Service Manual 13 6-Segment Revolver Head (8000)
Edition 07/97 13.1 6-Segment Revolver Head (8000)
13 - 5
13.1.4 Structure of the 6-Segment Revolver Head (8000)
Fig. 13.1.1 Structure of the 6-segment revolver head 8000
1 Reject circuit valve adjustment drive
2 Z axis toothed belt
3 Star motor
4 Distributor board
5Silencer
6 Head cover
7 Components camera
8 Z motor
9Star
13.1.5 Removing the ’Cover complete’
● Remove the five M3x5 hexagon socket screws for mounting the cover (see Fig. 13.1.2, point A).
● Pull the cover a little towards you in horizontal direction (see Fig. 13.1.2, point B).
● Lift the cover up and away (see Fig. 13.1.2,point C).
● To install the cover, proceed in the reverse sequence of operations.
13 6-Segment Revolver Head (8000) SIPLACE 80S-20/F4 Service Manual
13.1 6-Segment Revolver Head (8000) Edition 07/97
13 - 6
Fig. 13.1.2 Mounting and dismantling the cover
13.1.6 Removing the ’Placement Head Complete’
Spare parts
Revolver head 8000, from item no. 00324963S01
● Disconnect plug-in connections X3, X10, X12, X13, X14, X17, X18 and X19 from head board C0005.
● Disconnect all compressed air lines from the back of the vacuum generator.
● Undo the three hexagon socket screws (M4 x 16) (Refer to section 13.1.3 A) and carefully remove the
placement head from the placement machine.
– To install the head, proceed in the reverse sequence of operations.
NOTE
Pay attention to the keying of the plug when you reconnect the plug-in connections to head board C0005.
CAUTION ∆
!
Make sure you do not damage the cable or put tensile stress on the snap-in connections.