00194798-01 - 第21页

Installation Manual, Station Software Version 602.01 Edition 06/2006 4.3 Inst alling the SIPLACE software 4.3.1 Requirements You must have installed the Window s XP Professional operating system wi th service pack 2 befo…

100%1 / 120
Installation Manual, Station Software Version 602.01 Edition 06/2006
20 of 60
4.2.5 Creating a setup CD for the MC on a CPU420 (Microbox) and making the BIOS
settings on the MC
→ Insert an empty CD-R in the CD-RW drive.
→ Insert the CD for version 602.01 of the software in the CD ROM drive.
→ In the Windows Explorer, open the "BIOS-Images" folder on the CD.
→ Open the image file "CPU420_MC_BIOS_Settings.iso" using the installed CD writing program and
follow the instructions on screen.
→ Once the CD has been written, remove the CDs from the drives.
→ Insert the CD you have created in the CD ROM drive of the machine controller and boot from the CD
by switching the machine on. The BIOS settings are now performed automatically.
→ After the settings have been made, remove the CD from the drive and switch the machine off again.
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.3 Installing the SIPLACE software
4.3.1 Requirements
You must have installed the Windows XP Professional operating system with service pack 2 before
installing the station computer version 602 (see section
3).
Caution:
When installing the RMOS operating system (see section
4.6.1 for the CPU076, section
4.8.1 for the CPU086 and section 4.9.1 for the CPU420) it is imperative that the Version
602.01 installation CDs are used. The machine will not boot if this is not done.
The default Windows display settings must be changed and the touchscreen must be calibrated. You
must be logged on as the
Administrator in order to be able to carry out this work.
4.3.1.1 Changing the display settings
→ Select Start Æ Settings Æ Control Panel Æ Display.
→ Click the Settings tab.
→ Make the following settings here:
Fig. 4-1: Screen settings
21 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.3.1.2 Calibrating the touchscreen for the X-Series
Select Start Æ Settings Æ TouchWare, to start the TouchWare Properties applet.
Fig. 4-2: TouchWare Properties
→ Open the Multiple Monitors tab.
22 of 60