00194798-01 - 第22页
Installation Manual, Station Software Version 602.01 Edition 06/2006 4.3.1.2 Calibrating the touchscreen for the X-Series Select Start Æ Settings Æ TouchWare , to start the TouchWare Properties applet. Fig. 4-2: TouchWar…
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.3 Installing the SIPLACE software
4.3.1 Requirements
You must have installed the Windows XP Professional operating system with service pack 2 before
installing the station computer version 602 (see section
3).
Caution:
When installing the RMOS operating system (see section
4.6.1 for the CPU076, section
4.8.1 for the CPU086 and section 4.9.1 for the CPU420) it is imperative that the Version
602.01 installation CDs are used. The machine will not boot if this is not done.
The default Windows display settings must be changed and the touchscreen must be calibrated. You
must be logged on as the
Administrator in order to be able to carry out this work.
4.3.1.1 Changing the display settings
→ Select Start Æ Settings Æ Control Panel Æ Display.
→ Click the Settings tab.
→ Make the following settings here:
Fig. 4-1: Screen settings
21 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.3.1.2 Calibrating the touchscreen for the X-Series
Select Start Æ Settings Æ TouchWare, to start the TouchWare Properties applet.
Fig. 4-2: TouchWare Properties
→ Open the Multiple Monitors tab.
22 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
Fig. 4-3: TouchWare Properties – Multiple Monitors tab
→ Click the Map Touch Screens button.
The "Multiple Monitor Layout" dialog box appears.
23 of 60