00194798-01 - 第38页
Installation Manual, Station Software Version 602.01 Edition 06/2006 Note: The following screen only appears if applications are open which use files which must be updated during installation of SIPLACE. Fig. 4-20: Open …
Installation Manual, Station Software Version 602.01 Edition 06/2006
Entering the Machine Identification Number (MID)
Fig. 4-19: Entering the Machine Identification Number (MID)
→ In the text box, enter the 8-digit machine identification number.
Note:
You will find the MID on an adhesive label on the side of the protective covers directly
below the label for the number of the relevant location. The number following the dash
after the MID specifies the location and is not entered here (e.g. 00000001-2 stands for
location 2).
→ Click the Next button.
37 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
Note:
The following screen only appears if applications are open which use files which must
be updated during installation of SIPLACE.
Fig. 4-20: Open applications
→ Close the applications listed here and then click the Retry button.
The installation program now installs the additional programs on the station computer.
38 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
Finalizing the installation
Note:
The status only lists the programs that have just been installed. If, for instance, the
current version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
→ If you wish to read the log of the installation of any program, click the Ok (or Error) button next to the
name of the program. The Notepad is started and displays the appropriate file.
Fig. 4-21: Final dialog of the installation
→ Click the Finish button.
Note:
To establish the connection between the station computer and the machine controller
after installation has been completed the station computer must first be run down and
the machine must then be switched off completely.
→ To do this, click Shut Down in the Start menu and select Shut Down from the dropdown list followed
by the OK button.
→ Switch the machine off when the station computer has shut down.
→ Switch the machine back on again. This reboots both the station computer and the machine controller.
39 of 60