HS50_advance_level 1_20200522_221201 (1) - 第130页

06/2002 E dition Studen t Guide H S-50 Advance d I 5 DLM1 C&P H ead 38 5 F ig. 5. 4 - 5 Di sma nt ling / fi tti ng t he fro nt part of the r ev ol ver h ea d - part 2 Key to Fig. 5.4 - 5 (A) Hexagon s ocket-head scre…

100%1 / 567
Student Guide HS-50 Advanced I 06/2002 Edition
5 DLM1 C&P Head
37
. 5
Fig. 5.4 - 4 Dismantling / fitting the front part of the revolver head - part 1
(1) Front part of the revolver head
(2) Back part of the revolver head
(3) Head board
(4) Intermediate distribution board
X9 Plug for the component camera and component illumination system
X13 to plug X2 on the intermediate distribution board (4)
X14 to plug X1 on the intermediate distribution board (4)
(A) Loosen the M4x16 hexagon socket-head screw 5
06/2002 Edition Student Guide HS-50 Advanced I
5 DLM1 C&P Head
38
5
Fig. 5.4 - 5 Dismantling / fitting the front part of the revolver head - part 2
Key to Fig. 5.4 - 5
(A) Hexagon socket-head screws
(B) Push the collar of the compressed air coupling in the direction indicated by the arrow, detach
the black compressed air line and pull it out of the cable clip (C).
Student Guide HS-50 Advanced I 06/2002 Edition
5 DLM1 C&P Head
39
5.4.3.3 Fitting the front part of the revolver head
5
Fig. 5.4 - 6 Turn the star approximately 15°from the vertical sleeve position for installation position of the distributor
plate
(1) Star
(2) Distributor plate
(3) Parallel pins
(4) Raised part of the distributor plate
5
5
➠ Grease the O-rings with Unisilikon.
➠ Push the small O-ring onto the tube.
➠ Place the large O-ring in the hole for the distributor block (item 7 in Fig.
5.4 - 24
, page 5 - 68).
➠ Check that the O-rings are seated correctly.
➠ Insert the distributor block into the back part.
➠ Check that the distributor plate is inserted correctly:
– The circular raised part (4) of the distributor plate (2) the back part of the revolver head.
– The parallel pins (3) on the star engage in the holes in the distributor plate.
➠ Turn the star approximately 15° away from the vertical sleeve position.