HS50_advance_level 1_20200522_221201 (1) - 第164页

06/2002 E dition Studen t Guide H S-50 Advance d I 5 DLM1 C&P H ead 72 5.4. 12.4 Fitting the collect&pla c e he ad on the he ad mount 5 F ig. 5. 4 - 28 F ittin g t he c ol lect& pla c e he ad ➠ Carefully m ov…

100%1 / 567
Student Guide HS-50 Advanced I 06/2002 Edition
5 DLM1 C&P Head
71
PLEASE NOTE:
Refer to Fig. 5.4 - 29
on page 5 - 73 and Table 5.4 - 5 on page 5 - 74 for connecting the
compressed air hoses.
➠ Push the collar (3) towards the vacuum generator (V) and remove the black compressed air
hose (D).
➠ Undo the three hexagon socket-head screws (M4x16) (item A in 5.4 - 27).
5
Fig. 5.4 - 27 Fixing the collect&place head on the head mount
➠ Carefully pull the collect&place head away from the parallel pins (Item 4 in Fig. 5.4 - 28) on the
head mount and remove it from the placement system.
06/2002 Edition Student Guide HS-50 Advanced I
5 DLM1 C&P Head
72
5.4.12.4 Fitting the collect&place head on the head mount
5
Fig. 5.4 - 28 Fitting the collect&place head
➠ Carefully move the collect&place head (item 1 in Fig. 5.4 - 28) onto the head mount (2).
➠ Make sure that the parallel pins (item 4 in Fig. 5.4 - 28) on the head mount slide into the holes
in the back part of the collect&place head.
➠ Carefully push the collect&place head towards the head mount until it is lying flat.
➠ Use three M4x16 hexagon socket-head screws to fix the collect&place head (A).
➠ Connect the plugs for the collect&place head to the head board.
The plug positions and assignment is shown in Fig. 5.4 - 25
.
CAUTION Check the polarity of the plugs before connecting. 5
➠ Make sure that the plugs are firmly locked in place.
Student Guide HS-50 Advanced I 06/2002 Edition
5 DLM1 C&P Head
73
➠ Check that the plugs of the 40-pin ribbon cables between the intermediate distribution board
and head board are correctly assigned:
➠ Make sure that the cables are not damaged and that there is no strain on the connecting
cables.
➠ Refer to Fig. 5.4 - 29 and Table 5.4 - 5 for connecting the compressed air hoses.
5
Fig. 5.4 - 29 Connection diagram for the compressed air hoses on the collect&place head
Cable Head board Intermediate distribution board
00333491-W1 X14 X1
00333491-W2 X13 X2
Tab. 5.4 - 4 Plug-in connections for the flat ribbon cables on the head board