HS50_advance_level 1_20200522_221201 (1) - 第197页
Studen t Guide HS-50 A dvanced I 06/200 2 Edition 6 Operat ing the S ITE ST S o ftware 13 6.3. 6.2 Ma chine Configura tion 6 Di spla ys th e curr ent machine configurati on for the conve y or and may be chan ged, if requ…
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
12
Opens a dialog window for
copying the selected
firmware file to the directory
C:\SRProgramme\CanFW.
Table selected
Current version
Firmware version installed in the individual machine options.
Download version
Version that may be loaded and which is located in the directory
C:\SRProgramme\CanFW.
Auto Download
Note:This function can only be selected for the subsystems 'component feeder tables'
and MTC.
Active
When this function is activated, the automatic download is performed.
All data same as under 1
The same download version is used for individual subsystems with the same hardware
revision level.
Target
Application
When this function is activated, the firmware is loaded that controls the actions of the
subsystems.
BIOS
When this function is activated, the operating system for the subsystems is loaded.
Options
Include special designs
Activating the special design solutions will increase your choice of download versions.
Download
The download is started with all selected settings. The old firmware files are moved to
the directory C:\SRProgramme\CanFWPool, the firmware files that are currently loaded
are now located in the directory C:\SRProgramme\CanFW.
File
The file extensions hex, jed and bhx are possible.
However, they do not influence the firmware in
any way.
Variant ID
Provides information on the type of firmware
version.
O: Series status
A-Z: Special design solution
Hardware ID
Provides information on the hardware revision
level of the subsystems.
1-3: Conveyor
Download destination
1:Application
0:BIOS
Opens the Firmware Info
dialog window for the display
of information on the current
download version.
Student Guide HS-50 Advanced I 06/2002 Edition
6 Operating the SITEST Software
13
6.3.6.2 Machine Configuration
6
Displays the current
machine configuration
for the conveyor and
may be changed, if
required.
Displays the current
machine configuration
for gantry 1 to 4 and
may be changed, if
required.
Conveyor selected
Conveyor type
- Single conveyor
- Synchronous dual conveyor
- Asynchronous dual conveyor
Fixed conveyor side
- left: The fixed side of the conveyor is
located on the left (viewing into the
direction of travel).
- right: The fixed side of the conveyor is
located on the right (viewing into the
direction of travel).
Input interface conv. 1/2
Here you can select the input interface
type for conveyor 1/2.
- SMEMA
- Siemens
Output interface conv. 1/2
Here you can select the output interface
type for conveyor 1/2.
- SMEMA
- Siemens
Barcode reader conv. 1/2
- without
- with
Ceramic substrate centering conv. 1/2
- None
- Mechanical substrate centering
- Oblique lighting
- Mechanical and oblique lighting
Gantry selected
Head
- 12-nozzle head: Revolver
head with 12 sleeves.
RV camera
- standard
- DCA camera
Nozzle changer
- None
- RV12 standard
- RV12 2-row
PCB camera
- Standard
- Multicolor
Component reject position
- Standard
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
14
6.3.7 Menu Bar: Help
6
Opens the table of contents
of the online help.
Description of the commands
that can be executed in the
currently open window. Call-up
of the context-sensitive help
system by pressing <Alt> <F1>.
Shows information about the
subsystems and the corresponding
version information.
Displays information
about the current version.