HS50_advance_level 1_20200522_221201 (1) - 第211页
Studen t Guide HS-50 A dvanced I 06/200 2 Edition 6 Operat ing the S ITE ST S o ftware 27 6.5. 6 Function s of the Revo lver Head in the Hold in g an d Reject Cir cuit Tur ning st a t ion Sw ivel in The swi vel -in act i…
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
26
6.5.5 Functions of the Star Axis
General functions
Calibration tool position
During the adjustment of the P-gain of the
z-axis, the active gantry approaches the
calibration tool position, and then moves
the z-axis to the calibration tool pocket in
the continuous run mode.
Step star axis
This function is used to index the star.
Clicking on the button causes the star to be
advanced by one segment. The positions of
the individual segments are represented
graphically on the screen.
Starts the continuous run for
adjusting the speed of the Star
axis and opens the Tacho
adjustment dialog box for the
display of the values determined.
Waiting time [msec]
In the data entry field enter the desired value
that must lie within the specified value range.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Star axis selected
Selects revolver head 1-4.
Opens the Axis continuous run dialog
box for presetting the waiting time of the
axis continuous run and for indexing the
star axis in the continuous run.
Student Guide HS-50 Advanced I 06/2002 Edition
6 Operating the SITEST Software
27
6.5.6 Functions of the Revolver Head in the Holding and Reject Circuit
Turning station
Swivel in
The swivel-in action of the dp drive is
activated. The sleeve is thereby turned.
Swivel out
The swivel-out action of the dp drive is
activated. The sleeve is thereby turned.
Initialize stepper motor
Swivels the dp station in and out.
Holding circuit
Vacuum in holding circuit
Checks the entire vacuum in the holding
circuit.The value measured is displayed
above the button.
Close nozzles
Closes the vacuum of the nozzles in the
holding circuit.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Reject circuit
Vacuum
Turns on/off the vacuum in the Reject circuit.
Air kiss
Turns on/off the vacuum in the reject circuit.
Initialize stepper motor
Moves the stepper motor into a defined
reference position. The valve plunger is
subsequently positioned at 'air kiss'.
Selects revolver
head 1-4.
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
28
6.5.7 Function of the Revolver Head in the Placement and Pick-up Circuit
Segment
Indicates the segment number.
Open [mbar]
Displays the value in mbar that was determined
by the vacuum test in the placement and pick-
up circuit, with the valve open.
Closed [mbar]
Displays the value in mbar that was determined
by the vacuum test in the placement and pick-
up circuit, with the valve closed.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Placement and pick-up circuit
Vacuum
On/Off
Turns on/off the vacuum in the placement circuit and/or pick-
up circuit.
Air kiss
On/Off
Turns on/off the air kiss in the placement circuit and/or pick-
up circuit.
Initialize stepper motor
Moves the stepper motor into a defined reference. The valve
plunger is subsequently positioned at 'air kiss'.
Test vacuum
Tests the vacuum for the nozzle currently set up in the
placement and pick-up circuit and displays - above the button
- the values measured with the valve both in open and closed
condition.
Measure vacuum
Checks the total value of the vacuum for the entire circuit.
The value measured is displayed above the button.
Step star axis
This function is used to index the
star. Every time you click on the
button the star is advanced by
one segment. The positions of the
individual segments are displayed
graphically on the screen.
Selects revolver
head 1-4.