HS50_advance_level 1_20200522_221201 (1) - 第217页
Studen t Guide HS-50 A dvanced I 06/200 2 Edition 6 Operat ing the S ITE ST S o ftware 33 Open ma gazi ne Opens ( m oves) t he l ocki ng plat e an d r ele ase s th e lo ckin g me cha nism of the noz zles . Gara g e Displ…
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
32
6.5.11 Magazine Functions of the Revolver Head Nozzle Changer
Specified nozzle...
Select the nozzle type for the specified nozzle.
This nozzle type will be accepted as the actual
nozzle by actuating the Accept button.
Filling level...
Enter the desired
filling level within the
specified value range.
Magazine
Displays the current magazine.
Actual nozzle
Indicates which nozzle type is set
up in the selected magazine.
Filling level
Indicates how many nozzles are
set up in the selected magazine.
Specified nozzle
Displays the preset nozzle type for
a magazine.
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Selects revolver head 1-4.
Select curr. mag.
No actions on the machine will be initiated when the buttons
Number, *Nozzle and Filling level are actuated. Only a
selection is being made.
Displays the reject position.
Position
Displays the number of the reject position.
Setpt. x [µm]
Displays the specified x-positions of the selected magazine.
Actual x [µm]
Displays the x-positions of the selected magazine determined after the calibration.
Setpt. y [µm]
Displays the specified y-positions of the selected magazine.
Actual y [µm]
Displays the y-positions of the selected magazine determined after the calibration.
Student Guide HS-50 Advanced I 06/2002 Edition
6 Operating the SITEST Software
33
Open magazine
Opens (moves) the locking plate and
releases the locking mechanism of
the nozzles.
Garage
Displays for the selected magazine the
segment in which the nozzles are
located.
Nozzle
Displays the nozzle type of the
selected magazine.
Segment
Displays the appropriate segment
number for the selected magazine.
Magazine
Displays the calibrated magazine.
Pick-up height [counts]
Displays the z-position of the selected magazine determined after the calibration.
Garage
Indicates the garage number.
Setpt. x [µm]
Indicates the preset x-positions of the
magazine selected.
Actual x [µm]
Indicates the x-positions of the
selected magazine, determined after
the calibration process.
Setpt. y [µm]
Indicates the preset y-positions of the
magazine selected.
Actual y [µm]
Indicates the y-positions of the
selected magazine, determined after
the calibration process.
Pick-up height [counts]
Displays the z-position of the selected
magazine determined after calibration.
Calibration
with pick-up height
Note:The functions All magazines and Curr.
magazine can also be selected with the addition
with pick-up height. The pick-up height will then
be included in the calibration of the selected
magazines.
All magazines
The PCB camera moves over the position
fiducials of the magazines and measures their x-
and y-positions.
Curr. magazine
The PCB camera moves over the position
fiducials of the selected magazine and
measures the x- and y-positions.
Pick-up height, all magaz.
Determines the current z-height of the nozzle in
the magazine thus determining the pick-up
height of the nozzles for the selected magazine.
Pick-up height, curr. magazine
Determines the current z-height of the nozzle in
the magazine thus determining the pick-up
height of the nozzles for the selected magazine.
06/2002 Edition Student Guide HS-50 Advanced I
6 Operating the SITEST Software
34
6.5.12 Revolver Head Component Sensor
Opening the screen for the
magazin functions of the
revolver head nozzle changer
Return to the main
view.
Call-up the view for the functions
of the revolver head component
sensor.
Opening the screen for the head
functions of the revolver head
nozzle changer
Call-up of the display of the RV
camera functions.
Call-up of the display of the
mapping functions of the
revolver head.
Call-up of the display of the
functions of the revolver head in
the placement and pick-up
circuit.
Call-up of the display of the
functions of the revolver head in
the holding and reject circuit.
Call-up of the display of the axis
functions of the revolver head.
Call-up of the display of the
functions of the revolver head.
Brightness measurements
Bright
Shows the bright value in [Digit] from the initialization of
the component sensor. The component sensor was
switched on during the measurement.The minimum
permitted bright value of the component sensor is shown
in parentheses.
Range: 800 - 1024 [Digit]
Dark
Shows the dark value in [Digit] from the initialization of the
component sensor. The component sensor was switched
off during the measurement.The maximum permitted dark
value of the component sensor is shown in parentheses.
Range: 0 -10 [Digit]
Initialize component sensor
Carries out a head reference run with all axes of the
revolver head on the active gantry and checks whether a
component sensor is present.The bright/dark
measurement is taken and displayed.
is displayed if the bright/dark measurements
do not lie within the specified limit values for
the bright/dark values.
Step star axis
This function permits the star
to be advanced step by step.
Every time this button is
clicked, the star is advanced by
one segment. The positions of
the individual segments are
displayed on the screen.
Selects revolver head 1-4.
Proportion of nozzle length in sensor
Measure selected segment
Measures the segment selected in the
list, enters the value determined and
takes this as a reference value.
Measure all segments
Measures all segments, enters the
values determined and takes these as
reference values.
List of measured values
Segment
Segment number of the nozzle and status of
measurement determination
White:
Measurement determination has not yet been
carried out for this segment.
Green:
Measurement determination has been carried
out for this segment.
Grey:
Measurement determination is not possible for
this segment.
Nozzle:
Shows what nozzle is located on the segment
Nozzle length [µm]:
Shows the nominal length of the nozzle.
Measured value [µm]:
Shows the measured nozzle length and the length of the
field of vision of the component sensor.
Info:
Shows the status of the measurement or issues an error
message.