HS50_advance_level 1_20200522_221201 (1) - 第249页
Studen t Guide HS-50 A dvanced I 06/200 2 Edition 19 7.4 Machine Offset s an d their interr elations hip s 1 © PL EA 1 V GC Train ing Ver s i on Dec / 0 0 Ca libr ation of S IP LA C E HS- 50 When ev er mec han ical r epa…
06/2002 Edition Student Guide HS-50 Advanced I
7 Calibration
18
0
fig 7.3 - 22 Save machine data
7.3.10 Save Machine Data
Student Guide HS-50 Advanced I 06/2002 Edition
19
7.4 Machine Offsets and their interrelationships
1
©
PL EA 1 V GC Training
Version Dec / 00
Calibration of SIPLACE HS-50
Whenever mechanical repair work has been done:
Ø for proper operation of the machine mechanical
adjustments are necessary and
Ø for the placement accuracy within our
specification some functions must been
meassured / calibrated.
06/2002 Edition Student Guide HS-50 Advanced I
20
2
©
PL EA 1 V GC Training
Version Dec / 00
Calibration of SIPLACE HS-50
Calibration Steps
The different calibration steps are integrated in the SITEST test software.
With „calibrate heads and cameras“ the following sequence is executed automatically
Ø calibrate the PCB-camera
Ø calibrate the component-camera
Ø execute the segment offset I (above)
Ø execute the segment offset II (below) and the camera camera offset
Ø calibrate machine zero point
Ø calibrate nozzle changer
Ø calibrate the P&P (IC)-camera with P&P head the Flip-chip-camera
Additionally manual work
Ø calibrate the pick up height of nozzles
Ø calibrate coordinates at the PCB transport
Ø calibrate component table positions
Ø calibrate the coplanarity module (option)
Before starting calibration
Ø program Star axis zero point correction
3
©
PL EA 1 V GC Training
Version Dec / 00
Calibration of SIPLACE HS-50
Calibrate PCB camera
In this menu we determine:
Ø the mechanical Pixel size of the CCD-sensor
in µm.
This is calculated with the calibration
factors „Kalibrierfaktoren“ AX/BX/CX ...
Saved in REAL.MA
XU_Pixel / YU_Pixel. (in 11500nm)
Ø the camera center pixel.
Ø the angle of the CCD-Sensor according the
machine coordinate system.
Saved in REAL.MA
“Kamera_offset_Winkel“
Ø the camera offset is done with segment offset
above (II)
CCD Sensor angle to the
machine coordinate system
11,5 µm
11,5 µm
5800µm
5800µm