HS50_advance_level 1_20200522_221201 (1) - 第391页
1 - 4 Editi on 06/2002 S tudent Guide HS - 50 Advance d I Co ntent s 4
Page
Contents
Student Guide HS-50 Advanced I Edition 06/2002
Contents
3
11 Pneumatic Cutter and Empty-Tape Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
11.1 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
11.2 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11.3 Tools, Expendable Materials, Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.4 Overview of Mechanical Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.5 Diagrams of Pneumatic System and Functional Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11.6 Resolving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
11.6.1 Exchanging the Pneumatic Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
11.6.2 Turning the Stationary and Movable Blade 180 ° . . . . . . . . . . . . . . . . . . . . . . . . . . 19
11.6.3 Exchanging the Stationary Blade and Movable Blade incl. Spacers. . . . . . . . . . . . 23
11.6.4 Exchanging: Short-Stroke Cylinder and Articulated Joint on Left / Right . . . . . . . . 28
11.6.5 Exchanging the Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
11.6.6 Exchanging the Solenoid Valve on Left or Right (and/or Cable). . . . . . . . . . . . . . . 35
11.6.7 Exchanging the Inductive Proximity Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11.6.8 Exchanging the Empty-Tape Duct Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
11.6.9 Exchanging Baffles and / or Reject Box (Profile). . . . . . . . . . . . . . . . . . . . . . . . . . . 41
11.6.10 Exchanging the Rubber-Metal Vibration Damper . . . . . . . . . . . . . . . . . . . . . . . . . 42
11.6.11 Final Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
11.7 Jumper Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1 - 4
Edition 06/2002 Student Guide HS-50 Advanced I
Contents
4
Student Guide HS-50 Advanced I Edition 06/2002
11 Pneumatic Cutter and Empty-Tape Duct
5
11 Pneumatic Cutter and Empty-Tape
Duct
11.1 Safety Instructions
DANGER
The chapters "Operational Safety" in User Manual SIPLACE HS-50 and in this Service Manual
take precedence.
The machine SIPLACE HS-50 is powered by
219/380 V +/- 5% or
230/400 V +/- 5% or
239/415 V +/- 5% or
117/204 V +/- 5% or
133/230 V +/- 5%,
50/ 60 Hz line voltage
Portions of the system therefore conduct dangerous electricity. Inside the machine frame this is
true even while the master switch is turned off.
The machine has to be switched OFF and disconnected from the mains before you perform any
work in the area of the cutter.
In addition, the compressed air supply must be turned off at the main valve of the compressed air
unit in the machine frame and the compressed air lines must be bled by actuating the needle valve
on the compressed air unit.
Always secure the machine against unauthorized reactivation, as described in the User Manual,
chapter "Lock-Out and Tag-Out Procedure ...". 11