HS50_advance_level 1_20200522_221201 (1) - 第444页
S tud ent Guid e HS-50 A dvanced I 0 6/2002 E dition 12 Pr eventive Maintenance 11 12.4 Mainten ance sch edule Inte rval Locatio n Equ ipmen t / spare p arts Done (date) Shif t Empty rej ect cont ai n er , clean are a wi…
06/2002 Edition Student Guide HS-50 Advanced I
12 Preventive Maintenance
10
12.3 Points to note when carrying out maintenance
work
The maintenance intervals stated for inspecting and replacing filter elements apply only to the
specified compressed air quality (see compressed air specification). If the quality is different, the
maintenance intervals should be reduced accordingly.
CAUTION
NEVER use compressed air to clean assemblies inside the placement system.
Once you have carried out the maintenance work, enter it in the maintenance schedule. We rec-
ommend that you carry out the work in the order specified in the maintenance schedule.
Toothed belt of turning station 00320041-01
Damping tube protective cover 00334359-01
Grease nipples 00366104-01 (8-pack)
Spare parts From item number
Student Guide HS-50 Advanced I 06/2002 Edition
12 Preventive Maintenance
11
12.4 Maintenance schedule
Interval Location Equipment / spare parts Done
(date)
Shift
Empty reject container, clean area with vacuum cleaner Collecting container, vacuum
cleaner
Clean nozzle changer Vacuum cleaner
Clean feeder modules Vacuum cleaner
Empty waste container Waste bin
Week Vacuum the PCB conveyor / sonar sensors
Vacuum cleaner
Clean the X/Y scales Ethyl alcohol, lint-free cloths
Replace nozzle changer magazines Magazine with cleaned
ceramic nozzles or new
nozzles
Empty the component drawer or flap on the 8 mm S
feeder (if present)
Collecting container
Month Replace the sleeves and the valve plungers
Laboratory gloves, lint-free
cottonwool buds, ethyl
alcohol, lens cleaning cloth,
set of clean nozzles, set of
clean and very lightly greased
valve plungers
Clean the linear guides for the X and Y axes
SIPLACE cleaning cloth, lint-
free cloths
Clean the running surface of the thrust bearing of
the y axis
SIPLACE cleaning cloth
Cleaning the Y-axis friction surface
SIPLACE cleaning cloth
2 Months Inspect or replace the filter cartridge
Drip tray, Phillips screwdriver,
new filter cartridge, if
necessary
2 Months
Inspect or replace the silencer for the Collect & Place
head
New silencer, if necessary
06/2002 Edition Student Guide HS-50 Advanced I
12 Preventive Maintenance
12
Clean and grease the toothed belts for the X and Z axes Short-bristled brush,
ISOFLEX TOPAS NCA52
Maintain the component table Vacuum cleaner, scissors,
whetstone, lint-free cloths,
WD40
4 Months Z axis:
Remove dirt from the toothed belt Brush
Clean the rollers, cogs and the toothed belt
Ethyl alcohol, lint-free cloths
Check the toothed belt for wear
Grease the toothed belt ISOFLEX TOPAS NCA 52
Check that the Z axis guide runs easily
Check the jaws for wear
Oiling the miniature roller table Syringe with Klüber
Structovis GHD
Distributor disk:
Blow through the distributor disk Compressed air
Clean the distributor disk
Ethyl alcohol, lint-free cloths
Grease it very sparingly on the back ISOFLEX TOPAS NCA 52
Star:
Wipe the star and the distributor disk Lint-free cloths
Apply a thin film of grease to the running surface of
the star brake
ISOFLEX TOPAS NCA 52
4 Months Segments:
Clean the segments
Ethyl alcohol, lint-free
cottonwool buds
Interval Location Equipment / spare parts Done
(date)