HS50_advance_level 1_20200522_221201 (1) - 第458页

S tud ent Guid e HS-50 A dvanced I 0 6/2002 E dition 12 Pr eventive Maintenance 25 Emp ty the co mponen t drawe r or f lap on the 8 mm S fee der : Unplug th e 8m m feede r s and lift t hem off t h e c ompone nt t able. a…

100%1 / 567
06/2002 Edition Student Guide HS-50 Advanced I
12 Preventive Maintenance
24
Student Guide HS-50 Advanced I 06/2002 Edition
12 Preventive Maintenance
25
Empty the component drawer or flap on the 8 mm S feeder
: Unplug the 8mm feeders and lift them off the component table.
a Use a brush or the vacuum cleaner to remove loose components from the component table.
s Empty the component drawer of the 2x8mm S feeder (if one exists).
d Open the flap of the 3x8 mm S feeder (if present) and remove the components.
f Wipe the base of the feeder to remove any dirt.
g Cut off any used tape flush with the feeder.
: Return the feeder to its original (correct) location.
12
Make sure that the feeder is seated firmly on the component table and is inserted in the correct
position.
12
: Close the protective cover.
: Repeat these tasks in every feeder area.
06/2002 Edition Student Guide HS-50 Advanced I
12 Preventive Maintenance
26
12.7 Maintenance work every month
12