HS50_advance_level 1_20200522_221201 (1) - 第465页
06/2002 E dition S tudent Guide HS-50 Advance d I 12 Preve ntive Maintenance 32 12.8 Mainten ance w ork ev ery 2 mon ths 12
Student Guide HS-50 Advanced I 06/2002 Edition
12 Preventive Maintenance
31
Clean the linear guides of the x and y axes
a Use the SIPLACE cleaning cloth to thoroughly clean the linear guides of the x and y axes over
their entire length.
a Use a lint-free cloth to remove any dislodged dirt from the linear guides.
a Oil and protect the linear guides with a new SIPLACE cleaning cloth.
Clean the running surface of the thrust bearing of the y axis
s Use a SIPLACE cleaning cloth to clean the running surface of the thrust bearing.
Cleaning the Y-axis friction surface
d Use a SIPLACE cleaning cloth to clean the Y axis friction surface.
: Close the protective cover.
: Repeat these tasks in every feeder area.
06/2002 Edition Student Guide HS-50 Advanced I
12 Preventive Maintenance
32
12.8 Maintenance work every 2 months
12
Student Guide HS-50 Advanced I 06/2002 Edition
12 Preventive Maintenance
33
You will need the following tools, consumables and equipment for the bi-monthly maintenance
tasks:
– Vacuum cleaner
– Condensate drip tray
– Brush with short bristles
– Phillips screwdriver
– Scissors
– Whetstone
– Clean, lint-free cloths
– ISOFLEX TOPAS NCA52 grease (Item no. 00328369-01)
– WD40 (Item no. 00325833-01)
– New filter cartridge, if necessary (Item no. 00336902-01)
– New silencer for the Collect&Place head, if necessary (Item no. from 00320964-01).
Check or replace the filter cartridge
: Open the door to the compressed air supply.
: Place a drip tray beneath the compressed air maintenance unit.
a Close the main compressed air valve.
s When both manometers read "0", switch the placement system off at the main switch.
d Remove the blanking cap by pulling the yellow cap release device down and turning the blan-
king cap counter-clockwise (bayonet fitting).