HS50_advance_level 1_20200522_221201 (1) - 第522页

S tud ent Guid e HS-50 A dvanced I Ausgabe 06/2 002 13 Opti ons HS50 7 V akuum T ooli ng 13 This option uses suction to pick up PCBs 8.5” wide and of various lengths and to hold them pre- cisely and level on a vacuum pl …

Ausgabe 06/2002 Student Guide HS-50 Advanced I

13 Options HS50

0201 Placement Phase 2 13

1.0201 Placement Phase 1 available

2. Software 503 SC und LC

3. DCA Camera

4. Component-Sensor (Modular head board)

5. Nozzle 906

Source: Handbook for 0201 Placement 00191667-04

Student Guide Software 503 00193396-01

Retrofitting instructions Component-Sensor 00193356-01

Retrofitting instructions Modular head board 00192393-01

PCB Camera Multicolor 13

The optional PCB camera Multicolor is used in place of the subgantry camera (PCB camera with

normal light) AND the optional oblique illumination. It is utilized to improve the recognition of fidu-

cials (reference marks) and therefore to achieve greater accuracy during placement.

Source: Retrofitting instructions PCB Camera Multicolor 00192232-01

Long board option 13

Source:

Vacuum pump 13

Source:Retrofitting instructions Vacuum pump 00193351-02

Air filter Box 13

Source:Retrofitting and Maintenance Instructions for „Air Filter Box, Incl. Fan with Increased Po-

wer“ 00193279-02

Student Guide HS-50 Advanced I Ausgabe 06/2002

13 Options HS50

Vakuum Tooling 13

This option uses suction to pick up PCBs 8.5” wide and of various lengths and to hold them pre-

cisely and level on a vacuum plate (tool top plate of vacuum tooling) during the placement pro-

cess.This establishes optimal conditions for placement.

Source:Retrofitting instructions Vacuum - tooling 00192368-01

Nozzle changer single/double 13

1. Nozzle changer with 5 Magazine

2. Nozzle changer with 10 Magazine

Source: Retrofitting instructions Nozzle changer 00191457-01

Fine calibration 13

Source:User manual Fine calibration 00193152-01

HS 50 --> HS50+ 13

1. Softwarepatch Station / Linecomputer

2. Star brake

Source: Retrofitting instructions Upgrade HS50+ 00193405-01

Ceramic Substrate Centering 13

Source: Retrofitting instructions for Mechanical Ceramic Substrate Centering HS-50 (Optional)

00192299-02

Ausgabe 06/2002 Student Guide HS-50 Advanced I

13 Options HS50

13.2 Software Options

GEM 13

Source: HW Retrofitting instructions GEM Option 00192376-01

Software instructions for Option "GEM Interface" 00192355-01

OIS (Operator Information System) 13

Source:Administrator Guide 00193315-02

Getting started with OIS 00193313-02

Component Level Indicator 13

Source: Software version describtion component level indicatior 00192361-01

Diagnostic system 13