3OM-1751-002w_G5S.pdf - 第108页
3OM-1751 1-54 1303-001 5.1 1 "Head Cntr Mark Pos" Window In this window, the teaching for the offset data is performed to correct the deviation of the head rotation center from the PEC recognition camera center…
3OM-1751
1-531303-001
•
Teaching Vacuum Nozzle
For the head rotation axis offset teaching, the two jig nozzles (standard
equipment) and one normal vacuum nozzles HV19C. Before the teaching
operation, change the nozzles in the "NOZ.CHNG." window (Operation
Sequence: Select [Unit Adj.] button in the Menus for Maintenance
→
Select
[Noz Chng.] button).
At that time, attach the nozzles onto the nozzle No. 1 positions.
·
Teaching Procedure
Procedure
(1) Select the head (1, 2 or All) for which the head rotation axis offset teaching
is performed.
Note
In the case that the multi-functional head is selected, select the nozzle to be
taught and press the [Teach Start] button.
(2) Press the [Teach Start] button.
(The designated beam will be moved to the specied position and the head
rotation axis offset is taught.)
•
When the teaching is started, the start conditions are checked.
•
During this temporary stop mode, the selection of any other menu item is
unavailable.
When the offset teaching is completed, the designated head returns to the
home position automatically.
The teaching results are displayed in the "Beam XY Offset Conrmation"
Display Area.
(3) Press the [Save] button.
(When this button is pressed, the teaching results are saved.)
5.10 "Head Rotate Axis" Window
3OM-1751
1-541303-001
5.11 "Head Cntr Mark Pos" Window
In this window, the teaching for the offset data is performed to correct the
deviation of the head rotation center from the PEC recognition camera center
reference value. Also, the reference mark position is taught, which was caught
using the PEC recognition camera when the head rotation center is moved onto
the component recognition camera view.
[1]
[2]
"Head Cntr" tab sheet F3A39
[1]
[2]
"Mark Pos" tab sheet F3A40
Graphic
Development
5.11 "Head Cntr Mark Pos" Window
3OM-1751
1-551303-001
[1] Teaching Data Display Section
Displayed are the each offset data items for the designated camera and head.
[2] Teaching Procedure Display Area
Displayed are the buttons to be used for the teaching operations.
Select camera
Each camera position in the graphic image of the machine is provided with a
button function.
When a button is pressed, the corresponding head is selected as an object
Camera for the teaching operation.
Select head
In this section, the buttons showing the head corresponding to each camera
are displayed as images.
Select the head for which the teaching is performed.
Change Window Display
Pressing each button corresponding to each teaching operation, changes over
the window to the corresponding teaching window.
When the window is changed over, the teaching in the displayed window is
performed.
The buttons corresponding to each window are as follows.
Head Cntr
: The window is changed to the teaching window for the head
rotation center.
Mark Pos
: The window is changed to the teaching window for the
reference mark position.
Note
The window can be changed over using the tabs in the window.
[Noz All] button
When pressed, the teaching operation for all the nozzles is performed.
[Noz] button
Using this function, the nozzle for which the teaching is preformed, is
designated.
When the [Noz] button is pressed, the input window appears.
[Teach Start] button
When pressed, this button executes the teaching operation.
[Save] button
When this button is pressed, the teaching results are saved.
5.11 "Head Cntr Mark Pos" Window