3OM-1751-002w_G5S.pdf - 第130页
3OM-1751 1-76 1303-001 6.2 "MOTOR" Window This window enables you to perform a manual operation (inching) of each unit and view the current system information. [1] [3] [2] F3A53 [1] SELECT BLOCK Buttons Each bl…
3OM-1751
1-751303-001
6.1.3 "List Dsp" Window
This enables you to view the I/O status of each sensor.
[1]
F3A52
[1] Status Indicator
Displayed is the status of each section.
6.1 "INP / OUT" Window
Graphic
Development
3OM-1751
1-761303-001
6.2 "MOTOR" Window
This window enables you to perform a manual operation (inching) of each unit
and view the current system information.
[1]
[3]
[2]
F3A53
[1] SELECT BLOCK Buttons
Each block in the graphic image of the machine is provided with a button
function.
The indication of the "[2] Unit Select Buttons" varies depending on the
selected block.
[2] Unit Selection Buttons
Arranged are the unit buttons for the block selected with a block selection
button.
When a button is pressed, the corresponding unit is selected.
[3] Display Change Buttons
Pressing any of these buttons, displays the corresponding window.
The description of each window is as follows.
Buttons Description
Operation
The corresponding window enables you to perform a manual operation
(inching) of each unit.
Sys Info
The corresponding window enables you to view the current system
information of the machine.
DI stop
The corresponding window enables you to view the machine monitor and
parameters.
List
The corresponding window enables you to view the status of each section.
T3A7
6.2 "MOTOR" Window
Graphic
Development
3OM-1751
1-771303-001
6.2.1 "Operation" Window
This enables you to perform a manual operation (inching) of each unit.
When the [Operation] button is pressed in the "MOTOR" window, the "Operation"
window appears.
[1]
[2]
[3]
[4]
F3A54
[1] "State" Group Box
The following information is displayed.
Crnt posn (Cmd)
Crnt posn (FB)
Total move posn
System state
Run alarm
Servo alarm
Err code
[2] "Servo sw" Group Box
The following buttons are provided.
[Reset Alm] Button
: Resets the alarm to its normal condition.
[Servo ON] Button
: Turns on the servomotor.
[Servo OFF] Button
: Turns off the servomotor.
6.2 "MOTOR" Window
Graphic
Development