3OM-1751-002w_G5S.pdf - 第160页
3OM-1751 1-106 1303-001 7.1 "List" T ab Sheet When the [List] tab is pressed in the "MaintWM" window, the following tab sheet appears. "List" Tab Sheet F3A86 The corresponding tab sheet enab…
3OM-1751
1-1051303-001
[1] Tabs
This "MaintWM" window is provided with the following Five tabs.
When each tab is pressed, the corresponding tab sheet appears.
Tabs Description
List
The corresponding tab sheet enables the operator to display the
present status for the oiling check-up, maintenance check-up and
designated check-up, as a list.
Oil
In this tab sheet the practice dates for the maintenance cycles (weekly,
monthly, every three months, every six months and every 365 days)
of the oiling check are displayed.
Upkeep
The corresponding tab sheet enables the operator to display the
setting status and present status for the nozzle, lter #1 (head lter)
and lter #2 (lter for air supply).
"Elapsed operation period" or "No. of picked-up components" can
be setup as the announcement condition. When the value reaches the
set value for either of the above two conditions, the announcement is
issued.
Design
The corresponding tab sheet enables the operator to display the
setting status and present status for the additionally set maintenance
check-up items (Maintenance 1, Maintenance 2 or Maintenance 3 for
maintenance announcements.)
"Elapsed operation period" or "No. of picked-up components" can
be setup as the announcement condition. When the value reaches the
set value for either of the above two conditions, an announcement is
issued.
Feeder
The corresponding tab sheet enables the operator to display the feeder
setting status and present status.
The No. of shots is setup for each of the feeder types (four types),
and the value reaches the set value, an announcement is issued. Also,
the current No. of shots can be cleared.
T3A15
[2] Tab Sheet Display Section
The corresponding tab sheet to the selected tab is displayed in this section.
As the initial display, the "List" tab sheet appears.
7. "MaintWM" Window
3OM-1751
1-1061303-001
7.1 "List" Tab Sheet
When the [List] tab is pressed in the "MaintWM" window, the following tab sheet
appears.
"List" Tab Sheet F3A86
The corresponding tab sheet enables the operator to display the present status for
the oiling check-up, maintenance check-up and designated check-up, as a list.
The graph showing the percentages (%), is divided using colors for the status.
Each color shows as follows.
Pale Green
: 0 to 69%
Pale Yellow
: 70 to 99%
Pink
: 100%
The feeder present status is shown as "Announced" or "Not Announced". When
even one of the feeders needs maintenance, "Announced" is displayed.
7.1 "List" Tab Sheet
Graphic
Development
3OM-1751
1-1071303-001
7.2 "Oil" Tab Sheet
When the [Oil] tab is pressed in the "MaintWM" window, the following tab sheet
appears.
[1] [2] [3] [4]
"Oil" window F3A87
In this tab sheet the practice dates for the maintenance cycles (weekly, monthly,
every three months, every six months and every 365 days) of the oiling check are
displayed.
Reference
Refer to "1.3 Items for Periodic Maintenance" in Chapter 1, Volume 4, for the
details of oiling check.
[1] Cycle
For the standard maintenance cycle, "Weekly", "Monthly", "3-Monthly",
"6-Monthly" and "365" are set.
[2] Start Day
In these data boxes, the practice dates set up in the NT-100 system software,
are displayed.
[3] Warning
In these data boxes, "Enable" or "Disable" for the warning of the
maintenance timing set up in the NT-100 system software, is displayed.
[4] Days, Total Comp, End Day
When the setting is performed using the NT-100 system software, the
indications are updated such as "Days" to "0", "Total Comp" to "0" and "End
Day" to "Date of (Start Day + Cycle)".
When the value of "Days" (elapsed date) reaches the value of "Cycle", the
background color turns to pink.
7.2 "Oil" Tab Sheet
Graphic
Development