3OM-1751-002w_G5S.pdf - 第161页

3OM-1751 1-107 1303-001 7.2 "Oil" T ab Sheet When the [Oil] tab is pressed in the "MaintWM" window, the following tab sheet appears. [1] [2] [3] [4] "Oil" window F3A87 In this tab sheet the …

100%1 / 268
3OM-1751
1-1061303-001
7.1 "List" Tab Sheet
When the [List] tab is pressed in the "MaintWM" window, the following tab sheet
appears.
"List" Tab Sheet F3A86
The corresponding tab sheet enables the operator to display the present status for
the oiling check-up, maintenance check-up and designated check-up, as a list.
The graph showing the percentages (%), is divided using colors for the status.
Each color shows as follows.
Pale Green
: 0 to 69%
Pale Yellow
: 70 to 99%
Pink
: 100%
The feeder present status is shown as "Announced" or "Not Announced". When
even one of the feeders needs maintenance, "Announced" is displayed.
7.1 "List" Tab Sheet
Graphic
Development
3OM-1751
1-1071303-001
7.2 "Oil" Tab Sheet
When the [Oil] tab is pressed in the "MaintWM" window, the following tab sheet
appears.
[1] [2] [3] [4]
"Oil" window F3A87
In this tab sheet the practice dates for the maintenance cycles (weekly, monthly,
every three months, every six months and every 365 days) of the oiling check are
displayed.
Reference
Refer to "1.3 Items for Periodic Maintenance" in Chapter 1, Volume 4, for the
details of oiling check.
[1] Cycle
For the standard maintenance cycle, "Weekly", "Monthly", "3-Monthly",
"6-Monthly" and "365" are set.
[2] Start Day
In these data boxes, the practice dates set up in the NT-100 system software,
are displayed.
[3] Warning
In these data boxes, "Enable" or "Disable" for the warning of the
maintenance timing set up in the NT-100 system software, is displayed.
[4] Days, Total Comp, End Day
When the setting is performed using the NT-100 system software, the
indications are updated such as "Days" to "0", "Total Comp" to "0" and "End
Day" to "Date of (Start Day + Cycle)".
When the value of "Days" (elapsed date) reaches the value of "Cycle", the
background color turns to pink.
7.2 "Oil" Tab Sheet
Graphic
Development
3OM-1751
1-1081303-001
7.3 "Upkeep" Tab Sheet
When the [Upkeep] tab is pressed in the "MaintWM" window, the following tab
sheet appears.
[1] [2] [3]
[4] [5] [6]
[7]
"Upkeep" window F3A88
The corresponding tab sheet enables the operator to display the setting status
and present status for the nozzle, lter #1 (head lter) and lter #2 (lter for air
supply).
[1] Group
In this section, the maintenance items of "Nozzle", "Filter #1" (head lter)
and "Filter #2" (air source lter) have been set.
[2] Start Day
In these data boxes, the practice dates set up in the NT-100 system software,
are displayed.
[3] Warning
In these data boxes, "Enable" or "Disable" for the warning of the
maintenance timing set up in the NT-100 system software, is displayed.
[4] Days
The total time period when the machine has been actually operated before
the practice date, is displayed using days and hours (24 hours).
When the total machine operation time period reaches the value of the
warning condition shown in [7], the background color turns to pink.
When the setting is performed using the NT-100 system software, the "Date"
display parameter is updated to "0".
7.3 "Upkeep" Tab Sheet
Graphic
Development