3OM-1751-002w_G5S.pdf - 第217页
3OM-1751 2-49 1303-001 2.6.2 "Nozzle Position" T ab Sheet [1] [2] F3B48 [1] Nozzle In this section, each nozzle No. is displayed. 2.6 "Nozzle" Window Graphic Development
3OM-1751
2-48
2.6.1 "Nozzle Level A" Tab Sheet
[1] [2]
F3B47
[1] Nozzle
In this section, each nozzle No. is displayed.
[2] Head 1 and Head 2
L (Height) [mm]
Each parameter indicates the offset of the bottom level of the normal nozzles
on each individual heads.
Measure each nozzle bottom level with a linear measure while the nozzle U/
D axis is zeroed and save the difference between the level and the master
nozzle level offset.
Note
These parameters are calculated using the formula "Nozzle Level Offset =
Master Nozzle Level - Measured Value of Normal Nozzle Level".
1303-001
2.6 "Nozzle" Window
Graphic
Development
3OM-1751
2-491303-001
2.6.2 "Nozzle Position" Tab Sheet
[1] [2]
F3B48
[1] Nozzle
In this section, each nozzle No. is displayed.
2.6 "Nozzle" Window
Graphic
Development
3OM-1751
2-501303-001
[2] Head 1 and Head 2
X (Horizontal) and Y (Vertical) [mm]
Displayed is the offset data for the lowest levels of the normal nozzles on
the heads. The lowest level of each nozzle is measured by the component
recognition camera and the difference between the actual and recognized
levels is compensated for.
Xm(+)
Ym(+)
Xm-Ym :
DD (+)
DD (+)
Nozzle Designed Position
Real Nozzle Position
Pm. Machine Reference
Coordinate Origin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Machine Reference
Coordinate System
F3B49
2.6 "Nozzle" Window