3OM-1751-002w_G5S.pdf - 第222页
3OM-1751 2-54 1303-001 2.6.6 "Nozzle Axis" T ab Sheet [1] [2] F3B53 [1] Nozzle In this section, each nozzle No. is displayed. [2] Head 1 and Head 2 X (Horizontal) and Y (V ertical) [mm], Z [Ang] Displayed is th…
3OM-1751
2-531303-001
2.6.5 "LS Detection Position" Tab Sheet
[1] [2]
F3B52
[1] Nozzle
In this section, each nozzle No. is displayed.
[2] Head 1 and Head 2
Z [Ang]
As these parameters are for dummy PCB, they are not used currently.
2.6 "Nozzle" Window
Graphic
Development
3OM-1751
2-541303-001
2.6.6 "Nozzle Axis" Tab Sheet
[1] [2]
F3B53
[1] Nozzle
In this section, each nozzle No. is displayed.
[2] Head 1 and Head 2
X (Horizontal) and Y (Vertical) [mm], Z [Ang]
Displayed is the offset data for nozzle replacement.
The displayed values indicate the offsets for the lowest levels of the special
nozzles on the heads.
The lowest level of each nozzle is measured by the component recognition
camera and the difference between the actual and recognized levels is
compensated for.
2.6 "Nozzle" Window
Graphic
Development
3OM-1751
2-551303-001
2.6.7 "Press-Fit Work" Tab Sheet
[1]
[2]
F3B54
[1] Nozzle
In this section, each nozzle No. is displayed.
[2] Head 1 and Head 2
Press Fit Level [mm]
The correction is performed when the nozzle attachment position is deviated
due to the component change in these text boxes.
Positive value reduces the operation range and negative value increases the
operation range.
2.6 "Nozzle" Window
Graphic
Development