3OM-1751-002w_G5S.pdf - 第230页
3OM-1751 2-62 1303-001 2.9 "Comp. Recog" Window [1] [2] [4] [3] F3B61 [1] Of fset select tab When this button is pressed, the offset data for the selected tab is displayed. [2] Of fset Data Display Section In t…
3OM-1751
2-611303-001
Mag. X (Horizontal) and Y (Vertical) [0.01 µm/pixel]
Set how many micrometers should be equivalent to one pixel to specify the
magnication of the PEC recognition camera.
The parameters are automatically calculated through teaching operations
performed using the magnication measurement jig.
•
Default : 2500
Contrast and Brightness
The brightness of the image captured by the PEC recognition camera can be
adjusted.
•
Defaults
Contrast
: 102
Brightness
: 128
Note
(a) The larger the value for "Contrast" is, the stronger the chromaticness
becomes.
(b) The larger the value for "Brightness" is, the brighter the whole view
becomes.
[2] PCB Recog Light
Ring Light, Coaxial Light
Set the light level for PCB Recog Light.
•
Defaults
Ring Light
: 20
Coaxial Light
: 30
2.8 "PCB Recog" Window
3OM-1751
2-621303-001
2.9 "Comp. Recog" Window
[1]
[2]
[4]
[3]
F3B61
[1] Offset select tab
When this button is pressed, the offset data for the selected tab is displayed.
[2] Offset Data Display Section
In this section, the offset data selected in step [1] is displayed.
[3] [Save] button
When this button is pressed, the input data is saved.
[Cancel] button
When this button is pressed, the input data is cancelled and the save data is
returned.
[4] [Return] button
When this button is pressed, the "Offset Data" window is returned.
2.9 "Comp. Recog" Window
Graphic
Development
3OM-1751
2-631303-001
2.9.1 "Comp. Recogn Cam" Tab Sheet
[1]
[2]
[3]
[4]
F3B62
[1] X (Horizontal) and Y (Vertical) [mm]
The set parameters are used to adjust the positional deviations based on the
design dimensions between the machine reference coordinate origin and the
center of the component recognition cameras.
Xm(+)
Ym (+)
Xc(+)
Yc(+)
Xc(+)
Yc(+)
Center of Component
Recognition Camera
Center of Component
Recognition Camera
Pm. Machine Reference
Coordinate Origin
Xm-Ym
Xc-Yc
: Machine Reference
Coordinate System
: Component Recognition
Camera Coordinate System
F3B63
2.9 "Comp. Recog" Window
Graphic
Development