3OM-1751-002w_G5S.pdf - 第63页

3OM-1751 1-9 3.2 Nozzle Stocker When the nozzle stocker button is pressed, the following window appears. [1] [2] F3A8 [1] Unit select [Non] Button : When pressed, the unit without nozzle stocker is selected. [High] Butto…

100%1 / 268
3OM-1751
1-81303-001
3.1 Head Unit
3.1.1 Attached Head Judgment Window
This window is displayed when the head option is not the same as one set as the
head to be attached when the machine is started up.
F3A7
[1] Set
The head set in the machine is displayed in this data box.
In the case that the set head is "V10" head, "High-Speed V10" is displayed.
[2] Attached
The head attached to the machine is displayed in this data box.
In the case that the attached head is "V10" head, "High-Speed V10" is
displayed.
[3]
When the set head is not the same as the attached head, press this button to
re-start the system.
[4]
When the set head is the same as the attached head, press this button to
shutdown the system. Then, check the dip switch on the PCB mounted on the
head.
Note
In the case that this error occurs again, even when the dip switch is
checked, it might be caused by the communication system error.
3OM-1751
1-9
3.2 Nozzle Stocker
When the nozzle stocker button is pressed, the following window appears.
[1]
[2]
F3A8
[1] Unit select
[Non] Button
: When pressed, the unit without nozzle stocker is selected.
[High] Button
: When pressed, the unit with high-speed nozzle stocker is
selected.
[Odd] Button
: When pressed, the unit with middle size and odd shape
nozzle stocker (option) is selected.
[Multi] Button
: When pressed, the unit with multi-functional nozzle stocker
(option) is selected.
Graphic
Development
1303-001
3.2 Nozzle Stocker
3OM-1751
1-101303-001
3.2 Nozzle Stocker
[2] High-speed stocker
The high-speed stocker type is selected in this selection box.
[High] Button
: When pressed, the unit with high-speed nozzle stocker is
selected.
[High12] Button
: When pressed, the unit with MR12 nozzle stocker is
selected.
Multi-Functional Stocker Shape Selection
F3A9
The multi-functional nozzle stocker shape is selected in this section.
Standard
L1
L2
L3
GS-NM110(KYB-M9640-000).9 Nozzle
GS-NM111(KYB-M96E0-000) : Max.7 Nozzle
GS-NM112(KYB-M96E0-100) : Max.5 Nozzle
GS-NM113(KYB-M96E0-200): Max.3 Nozzle
F3A10
Note
When the nozzle stocker is to be added, an optional unit is required
separately.
•
Nozzle Stocker Setting Procedure
Procedure
(1) Press the button for the installed nozzle stocker in the "Unit Select" area.
Note
For the high-speed nozzle stocker, the stocker type is displayed and for the
multi-functional nozzle stocker, the stocker shape is displayed.
(2) Press the stocker type or stocker shape button.
(3) Press the stocker type or stocker shape button.