00198238-01_VD_SIPLACE_Pro_14.0_R16-2_DE_EN - 第19页

SIPLACE Pro 14.0 (R 16 - 2) / V ersion Description 12/2016 Edition 19 5 Restrictions In the following, existing restri ctions in SIPLACE Pro are de scribed. Miscellaneous – 10 - fold and 15 - f old stick magazine s canno…

SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition

4.11 Miscellaneous Features

– The Heavy Board Option – Line Connection floating license will not be checked any more in the

Line Control Server. This applies to all station versions.

– The SIPLACE Pro for DEK printer feature is not fully supported in this SIPLACE Pro version.

The recipe download from Line Control is not yet permitted.

– The BMC AppSight Windows Black Box Service recording tool is not supported anymore. The

tool itself will not be automatically deleted from existing systems. It has to be manually

uninstalled.

SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition

5 Restrictions

In the following, existing restrictions in SIPLACE Pro are described.

Miscellaneous

– 10-fold and 15-fold stick magazines cannot be combined on the same linear feeder.

– SIPLACE Pro object names (e.g., recipe) must not exceed 125 ASCII characters (including

folder names). If the station software is 504 or older, these names are shortened to 20 ASCII

characters.

– If various users optimize the same job at the same time, the job which was most recently

completed successfully will overwrite all corresponding recipes

– The operator must manually place manual tray carriers (Carrier 30, Carrier 51, Carrier X,

Carrier SX, Arbitrary Carrier), glue feeders and dip modules in the initial setup.

– If you work with reduced acceleration for a component shape, this is seen as a "special case"

and the accuracy of 5% for the simulated Optimizer production time will not be achieved.

– The Optimizer does not check if the tray size is bigger than the carrier.

– The WPC can take up to 10 different component types per level. This restriction does not apply

for machines from station software version 70x.

Station-wise Download

– It is not possible to switch over from dual lane conveyor in asynchronous transport mode to

dual lane conveyor in synchronous transport mode (and vice versa) in combination with station-

wise download.

– When the line control server is rebooted, station-wise downloading will be canceled. After

rebooting, you will need to perform a complete line download to restart production.

– Station-wise downloading supports setup changes in asynchronous dual operation only when

you have the same definition for both lanes.

– Station-wise downloading supports synchronous dual operation as of station software version

704.

ASCII Centroid Import

If component shapes are selected in the ASCII Centroid Import Wizard, all the existing links

between components and component shapes will be overwritten with the imported information.

WPC5 / WPC6

– Components up to a height of 30mm can be placed with a force of 70N with the WPC5 as of

serial number 1485 and the WPC6 as of serial number C1486 only.

– Components up to a height of 40mm can be placed with the WPC5 as of serial number B3000

and the WPC6 as of serial number C3000.

– Due to the refill module, components > 25mm cannot be positioned on the levels 1 – 3 and

27 – 28 on the WPC6. The levels 4 – 28 will be set up automatically by the SIPLACE Pro

Optimizer. The levels 1 – 3 have to be blocked manually by the operator.

– If a pin picker is installed on the X4i S placement machine, the maximum board length is

410mm.

SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition

Binning can be disabled in SIPLACE Vision

– If binning is disabled in SIPLACE Vision, the measuring in the simulation result of the

optimization will probably take a little longer.

External virtual ink spot handling

– Only possible for stations from station software version 707.0 on.

– Physical and virtual ink spot must not be mixed.

– The board must not contain any active ink spots.

Restrictions in the Production Schedule

PCB barcode mode is not supported.

Spring placement process

The board top edge position has to be constant from board to board to allow absolute placement.

Variable board warpages cannot be compensated.

Measuring and changing the component height measured by the component sensor at the

station

– Only for nozzle and component combinations in which the component height is supposed to be

measured with the component sensor.

– The component sensor will not perform any measurement if the component height

measurement is omitted due to SIPLACE Pro rules.

Conveyor Carrier X

– No travel range check.

– No pickup simulation.

– The Conveyor Carrier X uses one track on an X-table virtually. If the real table should be

completely occupied, the operator might have to remove a feeder from the table to create place

for the virtual feeder.

– No I-Placement mode.

– The SIPLACE Pro Optimizer does not consider the time it takes to fill up a tray with

components and change it.

Heavy Board Mode per board side

– No barcode mode possible.

Board Identification

– The Barcode located under the board property cannot be combined with the board barcode

mode.

Shuttle Extension for TX-series

– Barcode mode and station-wise download are not supported.