Specification SIPLACE X-Series S 规格说明书 - 第18页
18 Placement heads Nozzle changer Nozzle changer for the SIPLACE S peedSt ar (C&P20 P2) Nozzle changer for the SIPLACE MultiS t ar CPP Nozzle changer for th e SIPLACE T winSt ar 4 magazines for 20 nozzles of type 60x…
17
Placement heads
SIPLACE TwinStar (TH)
SIPLACE TwinStar
With component camera type 33
(fine pitch camera)
With component camera type 25
(flip chip camera)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
b
Max. height
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
c
b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be re-
stricted.
c) Component plus nozzle or gripper.
25 mm (higher available on request)
300 µm
150 µm
350 µm
200 µm
1.0 mm x 0.5 mm
55 mm x 45 mm (single measurement)
Up to
200 mm x 110 mm (multiple measure-
ment)
d
160 g
e
d) Further restrictions will apply, according to the component dimensions and the component supply. These will be auto-
matically taken into account by SIPLACE Pro.
e) Up to 100 g is standard. Over 100 g available with reduced acceleration.
25 mm (higher available on request)
250 µm
100 µm
140 µm
80 µm
0.6 mm x 0.3 mm
16 mm x 16 mm (single measurement)
Up to
55 mm x 55 mm (multiple measure-
ment)
d
160 g
e
Set-down force 1.0 N - 30 N
f
f) 15 N standard, with OSC package 30 N.
Nozzle types
g
g) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
20xx/28xx + adapter
9xx + adapter
Gripper
Nozzle spacing for P&P
heads
70.8 mm
X/Y accuracy
h
h) The accuracy values fulfill the conditions in the SIPLACE scope of supply and services.
± 26 µm/3σ ± 22 µm/3σ
Angular accuracy ± 0.05° / 3σ, ± 0.05° / 3σ
Illumination levels 6 6
18
Placement heads
Nozzle changer
Nozzle changer for the SIPLACE SpeedStar (C&P20 P2)
Nozzle changer for the SIPLACE MultiStar CPP
Nozzle changer for the SIPLACE TwinStar
4 magazines for 20 nozzles
of type 60xx
6 magazines for 20 nozzles of
type 60xx
1 magazine for 9 nozzles of
type 28xx
3 magazines for 20 nozzles of type 20xx
1 magazine for 9 nozzles of
type 28xx
5 magazines for 20 nozzles of type 20xx
Magazine for two standard nozzles
Magazine for one special nozzle, gripper
Description
Nozzle changers increase the flexibility of the placement heads when it comes to processing
different components. The nozzle configuration can be rapidly adjusted to changing place-
ment jobs. Precisely defined positions and perfect nozzle seat in the garage ensure minimum
radial eccentricity on the placement head.
The nozzle changers feature a monitoring circuit.This checks whether the nozzle magazines
are seated correctly on the mount. In addition, the nozzle changers recognize whether the
magazines are for 40xx/60xx, 20xx or 28xx nozzles by the code.
19
Placement heads
Nozzle changer
Technical data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
a) All magazines in the nozzle changer must be configured.
6
4
Maximum number of nozzle garages
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
6 magazines with 120 nozzle garages
4 magazines with 80 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 nozzle garages
Nozzle types 60xx
Nozzle changer for the SIPLACE MultiStar
Number of magazines
ab
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
b) With restrictions at location 2 for MTC/WPC
Please note: When you use the Smart Pin Support option, the maximum number of nozzle
changer magazines is reduced.
6
4
Maximum number of nozzle garages
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
80 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 x 20xx nozzle garages
Nozzle types
40xx, 11xx, 12xx
20xx, 28xx
Nozzle changer for the SIPLACE TwinStar
Number of magazines
Locations 1 and 3
Locations 2 and 4
max. 12 magazines for max. 24 nozzle garages
max. 10 magazines for max. 20 nozzle garages
Number of nozzle garages may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper