Specification SIPLACE X-Series S 规格说明书 - 第20页

20 Board conveyor Single and flexible dual conveyor Single conveyor When using a single con- veyor, boards are moved behind one ano ther, along a conveyor lane and into the placement machine, wher e they are placed. This…

100%1 / 68
19
Placement heads
Nozzle changer
Technical data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
a) All magazines in the nozzle changer must be configured.
6
4
Maximum number of nozzle garages
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
6 magazines with 120 nozzle garages
4 magazines with 80 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 nozzle garages
Nozzle types 60xx
Nozzle changer for the SIPLACE MultiStar
Number of magazines
ab
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
b) With restrictions at location 2 for MTC/WPC
Please note: When you use the Smart Pin Support option, the maximum number of nozzle
changer magazines is reduced.
6
4
Maximum number of nozzle garages
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
80 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 x 20xx nozzle garages
Nozzle types
40xx, 11xx, 12xx
20xx, 28xx
Nozzle changer for the SIPLACE TwinStar
Number of magazines
Locations 1 and 3
Locations 2 and 4
max. 12 magazines for max. 24 nozzle garages
max. 10 magazines for max. 20 nozzle garages
Number of nozzle garages may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper
20
Board conveyor
Single and flexible dual conveyor
Single conveyor
When using a single con-
veyor, boards are moved
behind one another, along a
conveyor lane and into the
placement machine, where
they are placed. This con-
veyor variant is particularly
suitable for very wide boards.
Flexible dual conveyor
To keep the range of PCBs to
be processed as wide as
possible - whilst maintaining
maximum productivity - the
flexible SIPLACE dual con-
veyor allows you to choose
between single conveyor
mode and dual conveyor
mode. In the dual conveyor,
two boards are moved into
the placement machine and
placed either at the same
time (synchronous mode) or
alternatively (asynchronous
mode). This makes it possi-
ble to process the top and
bottom sides of a board in
one line.
Flexible dual conveyor
IPC-Hermes-9852
A protocol for advanced development of Industry 4.0 in electronics production
The Hermes Standard, also published as IPC-HERMES-9852, is a non-proprietary open protocol,
based on TCP / IP and XML. This boosts the exchange of PCB-relevant data between the various
machines in the electronics production lines. The Hermes Standard was initiated, developed and
established and is still managed by a group of leading equipment manufacturers, who share their
know-how to achieve a significant step towards advanced process integration. It has been recognized
by IPC as the next generation solution for IPC-SMEMA-9851, normally known as "SMEMA standard".
The founding and defining body The Hermes Standard Initiative is available to all equipment providers
wanting to actively participate in using the benefits of Industry 4.0 for their customers.
21
Board conveyor
Technical data
Single conveyor Flexible dual con-
veyor
Dual conveyor in
single conveyor
mode
Board dimensions
(length x width)
a
a) Please observe the max. length of the board of 410 mm when using Smart Pin Support.
X2 S / X3 S / X4 S - standard 50 mm x 50 mm to
450 mm x 685 mm
b
b) Board width up to 560 mm as standard. Board widths up to 685 mm available on request.
50 mm x 50 mm to
450mm x 320mm
50 mm x 50 mm to
450 mm x 600 mm
b
X2 S / X3 S / X4 S - long board
c
c) With input/output conveyor only
50 mm x 50 mm to
850 mm x 685 mm
b
50 mm x 50 mm to
850mm x 320mm
50 mm x 50 mm to
850 mm x 600 mm
b
X4i S - standard 50 mm x 50 mm to
450 mm x 685 mm
b
50 mm x 50 mm to
380 mm x 320 mm
d
d) Full functionality only up to 380 mm x 320 mm. All restrictions relating to other board sizes will automatically be taken
into account by SIPLACE Pro.
50 mm x 50 mm to
450 mm x 600 mm
b
X4i S - long board
c
50 mm x 50 mm to
850 mm x 685 mm
b
50 mm x 50 mm to
760 mm x 320 mm
d
50 mm x 50 mm to
760 mm x 510 mm
d
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 24
PCB weight
e
Standard
e) The board weight value refers to the weight of the board plus the weight of the components.
Max. 3.0 kg
f
f) Standard 3.0 kg. Board weight up to 8.0 kg available on request.
Max. 2.0 kg
g
g) Standard 2.0 kg. Board weight up to 5.0 kg available on request.
Max. 2.0 kg
g
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Single conveyor
Dual conveyor
h
h) 0 seconds in asynchronous mode, otherwise 1.5 seconds.
< 1.5 seconds
0 seconds
Key information for machines in combination with SIPLACE X-Series S:
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series S, be aware that there is limited room between
the two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between
the two machines.
To achieve top placement performance, fit the first placement machine in a SIPLACE X-Series S line with an input conveyor extension
and the last placement machine in the line with an output conveyor extension.