Specification SIPLACE X-Series S 规格说明书 - 第21页

21 Board conveyor Technical data Single conveyor Flexible dual con- veyor Dual conveyor in single conveyor mode Board dimensions (length x width) a a) Please observe the max. length of the board of 410 mm when us ing Sma…

Board conveyor

Single and flexible dual conveyor

Single conveyor

When using a single con-

veyor, boards are moved

behind one another, along a

conveyor lane and into the

placement machine, where

they are placed. This con-

veyor variant is particularly

suitable for very wide boards.

Flexible dual conveyor

To keep the range of PCBs to

be processed as wide as

possible - whilst maintaining

maximum productivity - the

flexible SIPLACE dual con-

veyor allows you to choose

between single conveyor

mode and dual conveyor

mode. In the dual conveyor,

two boards are moved into

the placement machine and

placed either at the same

time (synchronous mode) or

alternatively (asynchronous

mode). This makes it possi-

ble to process the top and

bottom sides of a board in

one line.

Single conveyor

Flexible dual conveyor

IPC-Hermes-9852

A protocol for advanced development of Industry 4.0 in electronics production

The Hermes Standard, also published as IPC-HERMES-9852, is a non-proprietary open protocol,

based on TCP / IP and XML. This boosts the exchange of PCB-relevant data between the various

machines in the electronics production lines. The Hermes Standard was initiated, developed and

established and is still managed by a group of leading equipment manufacturers, who share their

know-how to achieve a significant step towards advanced process integration. It has been recognized

by IPC as the next generation solution for IPC-SMEMA-9851, normally known as "SMEMA standard".

The founding and defining body The Hermes Standard Initiative is available to all equipment providers

wanting to actively participate in using the benefits of Industry 4.0 for their customers.

Board conveyor

Technical data

Single conveyor Flexible dual con-

veyor

Dual conveyor in

single conveyor

mode

Board dimensions

(length x width)

a) Please observe the max. length of the board of 410 mm when using Smart Pin Support.

X2 S / X3 S / X4 S - standard 50 mm x 50 mm to

450 mm x 685 mm

b) Board width up to 560 mm as standard. Board widths up to 685 mm available on request.

50 mm x 50 mm to

450mm x 320mm

50 mm x 50 mm to

450 mm x 600 mm

X2 S / X3 S / X4 S - long board

c) With input/output conveyor only

50 mm x 50 mm to

850 mm x 685 mm

50 mm x 50 mm to

850mm x 320mm

50 mm x 50 mm to

850 mm x 600 mm

X4i S - standard 50 mm x 50 mm to

450 mm x 685 mm

50 mm x 50 mm to

380 mm x 320 mm

d) Full functionality only up to 380 mm x 320 mm. All restrictions relating to other board sizes will automatically be taken

into account by SIPLACE Pro.

50 mm x 50 mm to

450 mm x 600 mm

X4i S - long board

50 mm x 50 mm to

850 mm x 685 mm

50 mm x 50 mm to

760 mm x 320 mm

50 mm x 50 mm to

760 mm x 510 mm

Stationary conveyor side Right or left Right, left or outer

Automatic electrical width adjustment Standard

PCB thickness

Standard 0.3 mm to 4.5 mm

PCB warpage See page 24

PCB weight

Standard

e) The board weight value refers to the weight of the board plus the weight of the components.

Max. 3.0 kg

f) Standard 3.0 kg. Board weight up to 8.0 kg available on request.

Max. 2.0 kg

g) Standard 2.0 kg. Board weight up to 5.0 kg available on request.

Max. 2.0 kg

Clearance on PCB underside 25 mm

PCB conveyor height

Option

Standard

Option SMEMA

900 mm

930 mm

950 mm

Type of interface SMEMA or IPC-HERMES-9852

Component-free PCB handling edge 3 mm

PCB changeover time

Single conveyor

Dual conveyor

h) 0 seconds in asynchronous mode, otherwise 1.5 seconds.

< 1.5 seconds

0 seconds

Key information for machines in combination with SIPLACE X-Series S:

When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series S, be aware that there is limited room between

the two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between

the two machines.

To achieve top placement performance, fit the first placement machine in a SIPLACE X-Series S line with an input conveyor extension

and the last placement machine in the line with an output conveyor extension.

Board conveyor

Placement modes

Synchronous mode

In synchronous mode, two

boards are transported into

the placement position at the

same time. They are pro-

cessed as a common panel.

When using products with

greatly differing placement

content, common optimiza-

tion increases the perfor-

mance of the whole content

on both boards.

Asynchronous mode

In asynchronous mode, only

one board is processed on

one of the conveyor lanes. At

the same time, another

board on the second con-

veyor lane is moved into the

placement position. This

saves the full conveying time

of one board, thus consider-

ably increasing performance,

particularly for boards with a

short cycle time.

I-Placement

The SIPLACE line achieves

top placement performance

with the use of I-Placement.

In this mode, the two heads

work simultaneously and

populate the PCB on the cor-

responding conveyor side,

totally independently of one

another. Short distances fur-

ther increase the output.

Borrow Performance.

By facilitating simultaneous

production of two boards with

different contents in one line,

Borrow Performance is the

ideal addition to I-Placement.

In placement machines with

Borrow Performance, both

heads place the same board

in alternation The board in

the other conveyor lane is

simply transported through

the system. This makes it

possible to achieve the same

cycle time for both boards,

despite the different place-

ment contents.