Specification SIPLACE X-Series S 规格说明书 - 第29页

29 Component feeding Alternative SIPLACE modules SIPLACE Glue Feeder The SIPLACE Glu e Feeder allows you to position dots of adhesive on a componen t, before it is placed. The se dots of adhesive can then be checked by t…

Component feeding

SIPLACE SmartFeeder X / Xi

SIPLACE SmartFeeder X/Xi

are intelligent tape feeder

modules for flexible produc-

tion environments, which

simplify upgrading and con-

version tasks considerably.

Since all SIPLACE Smart-

Feeder X/Xi support tape

splicing as a standard, this

prevents machine stoppages

when refilling.

The benefits at a glance:

Conversion-friendly

• Omega profiles on the

tape feeder module and

table facilitate safe and

reliable upgrading and

conversion of tape feeder

modules during ongoing

production.

Robust

• Brushless motors extend

the service life of the

SIPLACE SmartFeeder X/

Xi.

Intelligent

• A unique ID ensures a pre-

cise assignment of the

component to the

SIPLACE SmartFeeder X/

Xi. This makes reliable

setup verification very sim-

ple.

• Component pitch, feeder

speed and other functions

are automatically set

when the setup program is

downloaded.

High feeding accuracy

• Closed loop control path

measurement ensures

highly accurate compo-

nent feeding, even for

0201 (metric) placements

with standard feeders.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the SIPLACE SmartFeed-

er X/Xi

• A multicolor status display

signals the operating sta-

tuses of the SIPLACE

SmartFeeder X/Xi.

Technical data

SIPLACE SmartFeeder X / Xi

L x H

[mm]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

SIPLACE SmartFeeder 4 mm Xi 587x200 10,8 1 1 1,1

SIPLACE SmartFeeder 8 mm Xi 587x200 10,8 1 1/2/4/8 3,5

SIPLACE SmartFeeder 2x8 mm Xi 587x200 22,9 2 1/2/4/8 3,5

SIPLACE SmartFeeder 12 mm X 587x200 22,6 2 4 - 16

SIPLACE SmartFeeder 16 mm X 587x200 22,6 2 4 - 20

SIPLACE SmartFeeder 24 mm X 587x200 34,4 3 4 - 32

SIPLACE SmartFeeder 32 mm X 587x200 46,2 4 4 - 40

SIPLACE SmartFeeder 44 mm X 587x200 58,0 5 4 - 52

SIPLACE SmartFeeder 56 mm X 587x200 69,8 6 4 - 64

SIPLACE SmartFeeder 72 mm X 587x200 81,6 7 4 - 80

SIPLACE SmartFeeder 88 mm X 587x200 105,2 9 4 - 96

SIPLACE SmartFeeder 104 mm X 587x200 128,9 11 4 - 96

Tape reels 178 to max. 483 mm diameter (7" - 19")

Changeover time ≤ 8 s

a) In 4mm steps

b) For 8 mm paper tapes, the paper thickness must not exceed 1.6 mm. The length of a component pocket

in the direction of tape travel may not exceed 51 mm.

Component feeding

Alternative SIPLACE modules

SIPLACE Glue Feeder

The SIPLACE Glue Feeder

allows you to position dots of

adhesive on a component,

before it is placed. These

dots of adhesive can then be

checked by the SIPLACE

Vision system. The required

glue dots can be defined in

the Component Shape Editor

in SIPLACE Pro and you can

also define whether individ-

ual dots of adhesive are to be

excluded from inspection or

not.

This adhesive function can

be enabled and disabled in

the Component Editor in

SIPLACE Pro. The SIPLACE

Glue Feeder is a special

feeder module which needs

to be configured as a fixed

feature on a certain table

track. It occupies 5 locations

of an 8 mm X feeder module,

max. 1 per head.

SIPLACE LDU 2 X

The SIPLACE LDU 2 X is

used for coating flip chips

and CSP components with

flux. The flux container slides

with a linear movement over

the dip plate and coats the

cavity in the dip plate with a

layer of flux (predefined layer

thickness). The parameters

for coating a component with

flux are prescribed in

SIPLACE Pro.

The component is coated

and then the flux layer is

renewed.

This sequence guarantees

consistent processing condi-

tions for the components.

The SIPLACE LDU 2 X is

taken into account as an

independent feeder module

type in the setup. An imple-

mented warming function

allows the viscosity of the

flux to be altered. It occupies

9 locations of an 8 mm X

feeder module.

SIPLACE

PowerConnector X

The SIPLACE

PowerConnector X helps to

resolve problems connected

to SIPLACE X feeder mod-

ules in the machine, without

the need to stop the produc-

tion process.

Component feeding

Alternative SIPLACE modules

SIPLACE MeasuringFeeder X

Description

The SIPLACE

MeasuringFeeder X is used

to prevent placement of

incorrect components by ver-

ifying the electrical values of

configured components. This

supports identification of

setup errors, such as mixed

up component tapes, incor-

rectly labeled component

reels or reels with counter-

feit, non-functional compo-

nents.

The SIPLACE

MeasuringFeeder X does

not feed in components itself

but instead measures com-

ponents which are already

on the changeover table, in

conventional tape feeder

modules. All components for

which an electrical value has

been stored in SIPLACE Pro

are picked up by the place-

ment head and the relevant

values are determined via

two contacts in SIPLACE

MeasuringFeeder X.

The SIPLACE

MeasuringFeeder X can

measure capacitors, resis-

tors and inductors, plus

diodes.

It can measure two-pin com-

ponents, which have contact

surfaces on the underside of

the component and a size of

at least (L x W)

0.6mmx0.3mm to

6 mm x 3.2 mm. It deter-

mines the capacity of capac-

itors, the electrical resistance

of resistors and the inductiv-

ity of inductors. It also checks

the blocking direction of

diodes and thereby the polar-

ity.

Measurable value range of components:

Component type Measuring range Measuring tolerance

Capacitors 1 pF - 100µF (standard)

100 nF - 500µF (polarized)

± 5%

Resistors 100 mOhm- 1MOhm ± 5%

Diodes Forward voltage 0.2 - 4 V Polarity check

Inductors 1µH - 1mH ± 15%

SIPLACE MeasuringFeeder X

Contact module