00197973-10_SM_MaterialTower - 第118页

在线预览 00197973-10_SM_MaterialTower PDF 文档。

00197973-10 / 02 , 2016 Z Axis

SIPLACE Mat. Tower Storage Service Manual © ASM 6-35

Clamp the cables of the new hybrid cable with

the shield terminals and tighten the screws by

hand. It is possible that other cables use the

same

shield terminal, if so re-connect them as

well.

Closing tasks

• Make sure all the cables are fitted correctly. They should not touch the door if closed.

• Make sure free movement is allowed for the hybrid cables along the whole driving range of

the X axis and the Z axis (no collision, no touching the chassis, no stretching of the hybrid

cable).

Finalize exchange steps

Remove all tools, attach all previously removed covers and close the doors of the machine.

Plug in the power connector and switch on the machine.

Initialize the machine by means of the software.

00197973-10 / 02 , 2016

7 Gripper

7.1 Gripper complete with Y carriage

7.1.1 Introduction

This modification instruction describes how to change the complete gripper with Y carriage on

SIPLACE Material Tower.

Spare part number: 03124554-01

Before starting the maintenance, read the Safety instructions carefully.