00197973-10_SM_MaterialTower - 第245页
0019797 3 - 10 / 02 , 2016 Option Air Dryer SIPLACE Mat. Towe r St ora ge Serv ice Manual © ASM 11 - 31 11.6.4 Exchange steps Step 1 Remove the cable tie which fixates the dryer's lower part and t he 4mm hose (si mp…
Option Air Dryer 00197973-10 / 02 , 2016
11-30 © ASM SIPLACE Mat. Tower Storage Service Manual
Spare parts:
03126683
-01, Exchange filter element
Time needed
Schedule around 30 to 60 minutes for this task.
11.6.3 Prerequisites
For a safe and efficient maintenance, the following prerequisites have to be fulfilled:
Personnel:
• Any work with or at the equipment must be carried out by skilled and
trained personnel in accordance with the locally applicable
regulations.
• Inform all involved persons regarding the currently running
maintenance works.
Machine loading:
• NO item must be unloaded.
Machine operating
condition:
• Shut down
Main electrical
power:
• Equipment disconnected from power supply system. The Main Switch
(switched off) locked by means of a padlock to secure the main switch
against unintentional switching on.
Compressed air /
Nitrogen (if used):
• Equipment disconnected from compressed air or nitrogen supply.
Access:
• Open the left side door of the machine, where the electrical unit and
the air dryer is located.
00197973-10 / 02 , 2016 Option Air Dryer
SIPLACE Mat. Tower Storage Service Manual © ASM 11-31
11.6.4 Exchange steps
Step 1
Remove the cable tie which fixates the dryer's
lower part and the 4mm hose (simple push
-in
connection).
Step 2
By turning clockwise, remove the
bottom part of
the membrane dryer housing (fine thread).
Exchange the filter element by pulling out the
old one and pushing in the new one.
Option Air Dryer 00197973-10 / 02 , 2016
11-32 © ASM SIPLACE Mat. Tower Storage Service Manual
Step 3
Reassemble the two body parts and screw tight.
Reattach a cable tie to fixate the drier lower part.
Push in the 4mm hose.
Step 4
Remove all tools and close the doors of the machine.
Plug in the power connector, connect the compressed air supply and switch on the machine.
Initialize the machine by means of the software.