OM-1241-005_w - 第128页

4-1 AIX-ML T-ID 0705-003 1. Periodic Maintenance 1. Periodic Maintenance This session describes how to perform inspections, cleaning, lubrication, and adjustment to keep the machine in good shape. Be sure to periodically…

100%1 / 211
4-B
AIX-MLT-ID
0705-003
4-1
AIX-MLT-ID
0705-003
1. Periodic Maintenance
1. Periodic Maintenance
This session describes how to perform inspections, cleaning, lubrication, and
adjustment to keep the machine in good shape.
Be sure to periodically perform the maintenance tasks to keep the machine in
good shape.
1.1 Precautionary Items before Maintenance
WARNING
Only a well-trained service person should perform maintenance
taskscarefullythroughthespeciedprocedures.
Before maintenance work, set the power breaker of the machine
(GXH series) to "OFF" and lock it with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
Note
Preliminary preparation is required for some maintenance tasks with the
power being supplied.
Check each maintenance method.
CAUTION
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF.
1.2 Preparation for Maintenance
1.2.1 Preparation for Cleaning
Prepare the following items.
•
Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Notice
The remaining waste thread if any will cause the machine to
break down.
•
Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
should not be mixed into the specied one.
Notice
The remaining waste thread if any will cause the machine to
break down.
4-2
AIX-MLT-ID
1.2.2 Preparation for Lubrication
Prepare for the specied types of grease and lubrication tools.
SpeciedGreases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
•
MOLYNOC GREASE AP1 (NIPPON OIL CORPORATION)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table D1
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS CO., LTD.
Lithtan 1 ESSO OIL
MP Grease 1 KYGNUS
Gemico MP-1 TonenGeneral Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.
•
Grease Types equivalent to MOLYNOC GREASE AP1
(NIPPON OIL CORPORATION)
Table D2
Grease Names Makers
DAPHNE Grease M No. 1 Idemitsu Kosan Co., Ltd.
Jomo Lisonix Grease M No. 1 JAPAN ENERGY CORPORATION
COSMO MOLYBDEN
GREASE No. 1
COSMO OIL LUBRICANTS
CO., LTD.
BEACON Q2 ESSO OIL
Gemico MD2 TonenGeneral Sekiyu K.K.
M5 GREASE 1 KYGNUS
1.2 Preparation for Maintenance
0705-003