OM-1241-005_w - 第66页

2-3 AIX-ML T-ID 2.2 Component Reloading When the [COMP . RELD.] button on the submenu bar of the "AUTO OPN." window is pressed, the "COMP . RELD." window appears. Fig. B2 "COMP . RELD." Wind…

2-2

AIX-MLT-ID

2. Menus for Automatic Operation

2.1 Outline of Menus for Automatic Operation

The following shows the hierarchical structure of the menus (including the

submenus and windows) for the automatic operation.

Note

The shadowed (gray) items are related to the multi-layer tray feeder.

Menus for Automatic Operation

Reference Item Nos.

Production

Component Reloading

Pickup Tray Matrix 2.2.1

Tray Component Data 2.2.2

Operation

Run Mode

Alternate Mode 2.3.1

Operation Mode 2.3.2

Test Mode 2.3.3

Splicing Mode

Production Data

Feeder (B) Offset 2.4.1

Component Carriage Data Editing 2.4.2

Recall

PCB Transfer

Fig. B1 Outline of Menus for Automatic Operation

2. Menus for Automatic Operation

0705-003

2-3

AIX-MLT-ID

2.2 Component Reloading

When the [COMP. RELD.] button on the submenu bar of the "AUTO OPN."

window is pressed, the "COMP. RELD." window appears.

Fig. B2 "COMP. RELD." Window

0804-004

2.2 Component Reloading

2-4

AIX-MLT-ID

When the feeder block button (F700) is pressed in the "COMP. RELD."

window, the operation sheet for component reloading on the multi-layer tray

feeder appears. The multi-layer tray feeder is installed on the selected feeder

block.

The "COMP. RELD." window for the multi-layer tray feeder is composed of

the "Pickup Tray Matrix" and "Tray Comp. Dt" operation sheets.

Note

When the feeder block button (where the multi-layer tray feeder is

connected) is pressed in the "PRODUCT." window, the "COMP. RELD."

window for the multi-layer tray feeder also opens.

[1]

[2]

Fig. B2-1 "COMP. RELD." Window (Multi-Layer Tray Feeder #3 Used)

[1] [Mag #2 Ready], [Pallet Chng Pos Ready], and [Mag #1 Ready]

Buttons

When each button is pressed, the LED of the [READY] switch on the

corresponding door illuminates, indicating that the door is locked.

[2] Crnt Mgzn and Crnt Step

how

n in the text boxes are the numbers of the magazine and step being

used at present.

0804-004

2.2 Component Reloading