00198500-02_VD_711.1_R18-1_DE_EN - 第22页

Station Software 71 1.1 (R18 - 1) / Versio n Description 05/2018 Edition 22 5.10 E nhanced SIP LACE Visio n Functionalit y NOTICE Detailed inform ation on the SIP LACE Vision functions can be found in the online help of …

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

Error Handling at the Station

The following error events may occur at the station after measurement:

1. No Vision measurement result available because:

– the bottom component is missing

– the bottom component is outside the search area

– the fiducial is incomplete

2. Measured bottom component position exceeds the tolerance.

In the first case, the operator will be prompted to teach the fiducial and repeat the measurement.

In the second case, a detailed error dialog displays the Vision image and the measured X, Y and

angle values of the bottom component. The current tolerance of the bottom component position is

displayed as well.

The operator can select between the following options:

► Skip placement of panel

i.e., skip placement of the remaining components of the panel to which the bottom component

belongs.

► Ignore result and continue with placement in panel

i.e., place the SIM card holder although the tolerance is exceeded.

5.8 Using Two Dip Modules for Dipping

Compatible mode: Complete

If two LDU dip modules are positioned on the same table and have the same type of flux medium

and same cavity depth, the station software uses both dip modules to dip components. The

components of one head-cycle are distributed on both dip modules.

5.9 Enhanced FCCS Tool

Compatible mode: Complete

The FCCS tool has been enhanced to support camera verification of the SST47 and SST25

camera types in combination with the CPP placement head.

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

5.10 Enhanced SIPLACE Vision Functionality

NOTICE

Detailed information on the SIPLACE Vision functions can be found in the online help of

the station software.

SIPLACE Vision has been enhanced as follows:

– The QR barcode type is supported. All QR barcodes of the 18004 ISO/IEC norm with format

Model 2 are supported.

Compatible mode: Compatible

– To avoid that an incorrect barcode is read for traceability purposes, the user can define

conditions for the barcode in the Vision system. If a barcode does not fulfill all conditions, the

Vision system looks for another barcode with valid conditions in the region of interest. The

conditions are saved in SIPLACE Pro.

Compatible mode: Hidden

– The Component Shape wizard supports teaching groups and regular grids of THT round pins

and THT square pins.

Compatible mode: Compatible

– The new SST48 and SST49 camera types are supported. Please also refer to section 4.3.

Compatible mode: Hidden

– Improved display of measuring steps on the GUI.

Compatible mode: Complete

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

6 Hardware Specifications

6.1 Supported Feeder Types

The following feeders are supported by the 711.1 station software version:

Modules from ASM Assembly Systems

– 4 mm – 104 mm X-feeder

– 8 mm - 88 mm E (E-series only)

– 2x8 mm X-feeder

– 16 mm XN-feeder

– Surftape AX (8 mm, 12 mm, 16 mm)

– LED feeder TE

LED feeder HS

– SIPLACE Glue Feeder

– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)

– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)

– SIPLACE JTF-ML (TX-series only)

– SIPLACE JTF-ML2 (TX-series only)

– JTF-MW E (E-series only)

– Arbitrary Carrier X

– Conveyor Carrier X

– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)

– Carrier SX (SX1/SX2 with Twin Head and CPP head only)

– Stick feeder with X-adapter

– Label feeder with X-adapter

– Reject conveyor with X-adapter

– Linear Dipping Unit X

– Linear Dipping Unit 2 X

– Linear Dipping Unit E (E-series only)

– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)

– WPC5/WPC6 (SX1/SX2, X-series S on location 2)

– SIPLACE Wafer Systems (CA-series only)

– Splice sensor X-feeder