00198500-02_VD_711.1_R18-1_DE_EN - 第30页

Station Software 71 1.1 (R18 - 1) / Versio n Description 05/2018 Edition 30 D1 - 147192301 The grouping of MTC/WPC component s d id not work. D1 - 147324601 The firmware downl oad onto a new WPC 6 failed 2 times with a c…

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

D1-140734101 Head cycle counts in the SIPLACE Pro optimized results and in the actual

machine run did not match each other.

D1-140943701 The images for the feeder pickup position were not put together correctly..

D1-141418801 Conveyor sub-system 1: 30450 Unspecified hardware error.

D1-142534201 Board barcodes had to be programmed with 2 mm offset on an SX V2

placement machine. The original data did not work.

D1-144465801 Endurance run functions could not be selected in the Manual Operations; an

error message was displayed immediately.

D18275-3701 TX2i placement machine: Machine stopped during normal production without

any error message.

Table 9-2: Corrected errors station software version 711.0

710.1 SP1

Error No.

Error description

D1-141115401

eSW: a board in the input conveyor was not transported into the placement

area.

D1-145118902 Production did not start after confirming nozzle configuration.

D1-145571745

D1-147043656

D1-145527801

eSW: the z axis was not able to initialize during the reference run; the

following error handling let the segment drop out of the raceway.

D1-146272909

After a restart the language was set to English although it was German

before.

D1-146361597 The "feed forward" button was not active.

D1-146433623

LED Centering: the machine omitted the validation of the glass plate before

placing the led on it.

D1-146449111

D1-146429348

The automatic calibration of the Vacuum Tooling failed because of incorrect

positions for chuck fiducials.

D1-146494912

SIPLACE ProgressData event "ProductionProgress" delivered wrong Context-

ID (CtxId).

D1-146524401

After program download a board was placed although one pin was declared

as faulty.

D1-146590633

eSW: there was a transport error when a special carrier was used because

the board sensor in the output section was activated too early.

D1-146802617

eSW: If the upstream machine was stopped and the conveyor software tried

to exchange a board in processing area 1, the board in the input area could

not be moved until the upstream machine was started.

D1-146821856 Conveyor: the width adjustment could not adjust the maximum width.

D1-146933102

D1-146935404

When BETZ feeders were used, there were more pickup errors with segment

1 (CPP head) than with the other segments.

D1-147134301 Gantry 2 stopped over the WPC6 tray without error message.

D1-147150443 The "automatic check of nozzle changer" function did not work.

D1-147177501 710.1.HF6: the tape cutter info was missing in the maintenance menu.

D1-147189601

A tray could be loaded into WPC although the station recognized it as too

high later.

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

D1-147192301 The grouping of MTC/WPC components did not work.

D1-147324601

The firmware download onto a new WPC6 failed 2 times with a controller

error 30016.

D1-147775001

Sporadically, the station software stopped during placement with error

message

30016 Unhandled exception error

D1-148003112

eSW: the board was transported from the intermediate section into placement

area 2 but did not get clamped.

D17647-21801 High reject rate for special component (spacer).

D17928-22501

The image was displayed distorted when the "correct position" function was

used.

D17933-45306

The machine tried to recognize an incorrect tray fiducial repeatedly without

stopping.

D18093-25513 The tray data in the generated traceability files was incorrect.

D18093-25601

Download without empty machine: it was not possible to verify components

after a program download while production was running. All feeders were

locked.

D18405-2201

The station software hung up when the pickup position was checked after a

pickup error.

Table 9-3: Corrected errors station software version 710.1 SP1

710.1 Patch 6

Error No.

Error description

D1-145731801 15µm vacuum tools could not be measured.

D1-145333801

Table 1: An error occurred while reading embedded software data from the

subsystem.

D1-145861401

Error message "32507 Product change: Finishing previous product prior to

setup change" and no more boards got into the machine.

D1-145863109

The calculation of the remaining time until the package is used up was not

correct.

D1-146194301

The calculation of the remaining time was not correct when synchronous dual

conveyor was configured.

D18433-301 Production stopped due to an unspecific hardware error of the axis.

D1-138937301

Placement offset of a heavy component because the gantry moved with full

speed during gantry repression.

D1-145522401 The WPC pickup process did not always start at the first pocket.

D18403-209 eSW: The X-axis motor hit the buffer mount of the X axis.

D1-146221801 The WPC pickup position was not calculated correctly.

Table 9-4: Corrected errors station software version 710.1 Patch 6

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

710.1 Patch 5

Error No.

Error description

D1-140785106

eSW: boards without board barcode required manual confirmation when they

were transported into the next machine.

D1-142933001

eSW: PCB-A interface: the board did not drive into the machine when the

acceleration was too small (< 1400 mm/s²).

D1-143801301

When the acceleration values were taught at the station, the x-axis values

were not transferred.

D1-145171201 Although the panel was marked with an ink spot, it got assembled.

D1-145202821 Restoring the conveyor configuration after mapping did not work.

D1-145232501 The software hung up after having sent a job.

D1-145282601

When conveyor lane 2 was calibrated, the conveyor control stopped with error

message

ISS software is not responding

D1-145398946

eSW: although there was no board in the output area, the machine displayed

one and could not continue production.

D1-145422501

eSW: the board moved directly from PA2 to the next machine; it did not stop

in the output area if the next machine was blocked.

D1-145571791

D1-145633801

D1-145658101

There was an IPC communication error when you pressed the display,

check and setup feeders button on the station software and the view

changed to

deactivated feeders

D1-145603609

D1-143839501

Sporadically the station software stopped during placement with error

message

30016 Unhandled exception error

D1-145691301 During production, gantry 2 stopped without any warning or error on the GUI.

D18294-3901 eSW: error message 35200 Board has not arrived in specified section.

Table 9-5: Corrected errors station software version 710.1 Patch 5

710.1 Patch 4

Error No.

Error description

D1-135126702 Head Verification: DP rotation and segment offset up tests were not possible.

D1-135126745

The Z axis movement and vacuum calibration tests failed but the machine

was ok.

D1-136288601 The board was transported into the input area and was not moved further.

D1-137766301 The teaching of acceleration values failed and component got lost.

D1-138967301 The use of an alternative LDU on the same table was not supported.

D1-139882801

The WPC tray was still moving when the head was ready for pick up. This

slowed down the machine.

D1-140734101

Head cycle count did not match between SIPLACE Pro optimized results and

actual machine run.

D1-141055501

Error message 35026 Pickup location is not ready although the

feeder seemed to be ready.

D1-141676501

Pocket recognition after a manual teaching process added the new position

value to the formerly detected one.