Siplace TX-设备参数-EN - 第21页

21 Component feeding Alternative SIPLACE modules SIPLACE Glue Feeder The SIPLACE Glue Feeder allows you to position dots of adhesive on a co mponent, before it is placed. These dots of adhesive ca n then be checked by th…

Component feeding

SIPLACE SmartFeeder X

are intelligent tape feeder

modules for flexible produc-

tion environments, which

simplify upgrading and con-

version tasks considerably.

Since all SIPLACE Smart-

Feeder X support tape splic-

ing as a standard, this

prevents machine stoppages

when refilling.

The benefits at a glance:

Conversion-friendly

• Omega profiles on the

tape feeder module and

table facilitate safe and

reliable upgrading and

conversion of tape feeder

modules during ongoing

production.

Robust

• Brushless motors extend

the service life of the

SIPLACE SmartFeeder X.

Intelligent

• A unique ID ensures a pre-

cise assignment of the

component to the

SIPLACE SmartFeeder X.

This makes reliable setup

verification very simple.

• Component pitch, feeder

speed and other functions

are automatically set

when the setup program is

downloaded.

High feeding accuracy

• Closed loop control path

measurement ensures

highly accurate compo-

nent feeding, even for

0201 (metric) placements

with standard feeders.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the SIPLACE SmartFeed-

er X

• A multicolor status display

signals the operating sta-

tuses of the SIPLACE

SmartFeeder X.

Technical data

SIPLACE SmartFeeder X

L x H

[mm]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

SIPLACE SmartFeeder 4 mm X 587x200 10.8 1 1 1.1

SIPLACE SmartFeeder 8 mm X 587x200 10.8 1 1/2/4/8 3.5

SIPLACE SmartFeeder 2x8 mm X 587x200 22.9 2 1/2/4/8 3.5

SIPLACE SmartFeeder 12 mm X 587x200 22.6 2 4 - 16

SIPLACE SmartFeeder 16 mm X 587x200 22.6 2 4 - 20

SIPLACE SmartFeeder 24 mm X 587x200 34.4 3 4 - 32

SIPLACE SmartFeeder 32 mm X 587x200 46.2 4 4 - 40

SIPLACE SmartFeeder 44 mm X 587x200 58.0 5 4 - 52

SIPLACE SmartFeeder 56 mm X 587x200 69.8 6 4 - 64

SIPLACE SmartFeeder 72 mm X

587x200 81.6 7 4 - 80

SIPLACE SmartFeeder 88 mm X

587x200 105.2 9 4 - 96

SIPLACE SmartFeeder 104 mm X

587x200 128.9 11 4 - 96

Tape reels 178 to 330.2 mm in diameter (7" - 13")

Changeover time ≤ 8 s

a) In 4mm steps

b) SIPLACE SmartFeeder tested up to 56 mm.

Component feeding

Alternative SIPLACE modules

SIPLACE Glue Feeder

The SIPLACE Glue Feeder

allows you to position dots of

adhesive on a component,

before it is placed. These

dots of adhesive can then be

checked by the SIPLACE

Vision system. The required

glue dots can be defined in

the Component Shape

Editor in SIPLACE Pro and

you can also define whether

individual dots of adhesive

are to be excluded from

inspection or not.

This adhesive function can

be enabled and disabled in

the Component Editor in

SIPLACE Pro. The SIPLACE

Glue Feeder is a special

feeder module which needs

to be manually configured as

a fixed feature on a certain

table track.

Linear Dipping Unit X

(LDU X)

The LDU X is used for coat-

ing Flip-Chips and CSP com-

ponents with fluxThe flux

container slides with a linear

movement over the dip plate

and coats the cavity in the dip

plate with a layer of flux (pre-

defined layer thickness). The

parameters for coating a

component with flux are pre-

scribed in SIPLACE Pro. The

component is coated and

then the flux layer is

renewed.

This sequence guarantees

consistent processing condi-

tions for the components.

The LDU X is taken into

account as an independent

feeder module type in the

setup. This module can be

set up on the component trol-

leys of the SIPLACE TX-

Series. An implemented

warming function allows the

viscosity of the flux to be

altered.

Linear Dipping Unit (occupies 5 loca-

tions of an 8 mm X feeder module

SIPLACE Glue Feeder (occupies 9 locations of an

8 mm X feeder module, max. 1 per head)

Component feeding

Alternative SIPLACE feeder modules

JTF-ML 2

The SIPLACE TX can

accommodate a SIPLACE

JTF-ML 2 at location 1. The

SIPLACE JTF-ML 2 is fitted

to the side.

Depending on the magazine

type, the SIPLACE JTF-ML

2 stores up to 18 thin or, as

an option, 14 thick JEDEC

waffle pack trays in an

exchangeable cassette and

supplies them as required.

The placement machine can

therefore be supplied with

different component types at

variable changeover times.

An output conveyor

extension is required when

using the JTF-ML 2. This

extends the conveyor by

600 mm.

Technical data

Width x length x height (tower)

374.5 mm x 322.7 mm x 707.0 mm

Width x length x height (conveyor)

356.2 mm x 346.0 mm x 68.2 mm

Weight

Tower (empty): 26.3 kg (58.0 lbs.)

Total: ~36 kg (79.4 lbs.) (depending on application)

Storage capacity

JEDEC waffle pack tray specification JEDEC Standard: 95-1 & IEC 60286-5

Waffle pack tray, thin 18 JEDEC waffle pack trays or

18 magazine trays (cookie trays)

(in two cassettes)

Thick waffle pack tray 14 JEDEC waffle pack trays or

14 magazine trays (cookie trays)

(in two cassettes)

Waffle pack tray changeover time 3.15 to 6.1 seconds (depending on application

)

a) 3.15 seconds to the next waffle pack tray with maximum acceleration, 6.1 seconds from the first to the

ninth waffle pack tray with minimum acceleration

Slot n to n+1 3.15 to 5.4 seconds (maximum/minimum accelera-

tion)

Cassette

Width x length x height 343.7 mm x 136 mm x 137 mm

Max. load weight (per cassette 4.45 kg (incl. weight of cassette)

JTF ML 2