HM520_Administrator∏s_Guide(Chi_Ver1.1) - 第345页
12-7 Machine Calibration Head & Camera Calib Up Camera Thermal Pos Ο Ο Ο Head Z Offset Ο Ο Ο Head Offset Ο Ο Ο SVS Z Position Ο Ο Ο Height Sensor Offset Ο Ο Ο Board Height Calibration Board Height Calibration Ο Ο Ο I…
12-6
Cutting-edge Modular Mounter HM520 Administrator's Guide
Head & Camera Calib Rough R-Axis Home
Offset
ΟΟ
Up Camera Scale 1 Ο Ο
Fid to Up Camera Hole
Offset 1
ΟΟ
Head Z-Axis Home Offset Ο Ο Ο
Light Mapping Ο
Fine R-Axis Home Offset Ο Ο Ο
Up Camera Scale 2 Ο Ο Ο
Fid to Up Camera Hole
Offset 2
ΟΟ
Head T-Axis Home Offset Ο Ο Ο
Nozzle Holder Inspection Ο Ο Ο
Head Block COR Ο Ο Ο
Head Block Ref. Mark Ο Ο Ο
Calibration Detail
Full
Calibration
Recalibration
Machine
Relocation
Head Change
12-7
Machine Calibration
Head & Camera Calib Up Camera Thermal Pos Ο Ο Ο
Head Z Offset Ο Ο Ο
Head Offset Ο Ο Ο
SVS Z Position Ο Ο Ο
Height Sensor Offset Ο Ο Ο
Board Height Calibration Board Height Calibration Ο Ο Ο
Individual Unit Calib Feeder Base Position Ο Ο Ο
Direct Tray Position Ο Ο Ο
User Dump Position Ο Ο Ο
Mount Offset Mount Offset Ο Ο Ο Ο
Calibration Detail
Full
Calibration
Recalibration
Machine
Relocation
Head Change
12-8
Cutting-edge Modular Mounter HM520 Administrator's Guide
12.1.2. 轴原点的测定
备注 接入本菜单时，需要通过“服务工程师”权限登入。
选择将要设定限度的驱动轴。可选择的驱动轴如下。
原点位置的定义：由Absolute Encoder 决定的位置，旋转的基准位置
有关原点的特性值：最大行程(Stroke)、软件极限值
图
12.5 “
系统坐标原点
&
限制信息
”
对话框
<电动机选择 > 目录框
选择将要设定限度的驱动轴。可选择的驱动轴如下。
<软件限制 > 领域
<X-Y 坐标限制自动的查找...> 按钮
自动查找XY轴的limit后，确认是否运用变更值。