HM520_Administrator∏s_Guide(Chi_Ver1.1) - 第384页
12-46 Cutting-edge Modular Mounter HM520 Administrator's Gui de Multi Function Head (MFH) Calibration Multi Functional Calibration T ool Up Camera Scale 1 Ο Fid to Up Camera Hole Of fset1 Ο Nozzle Holder Inspectio…
12-45
Machine Calibration
12.1.9. 贴装头 & 照明机校准(Head & Camera Calibration)
实行相机校准。校准的执行顺序与所需工具如下。
High Speed Head (HSH)
Calibration High Speed Calibration Tool
Rough R-Axis HomeOffset Ο
Up Camera Scale 1 Ο
Fid to Up Camera Hole Offset1 Ο
Head Z-Axis Home Offset Ο
Light Mapping Ο
HNFidMap Nozzle 1EA
HNFixMap Nozzle 1EA
Fine R-Axis Home Offset Ο HNHeadXY Nozzle 3EA
Up Camera Scale 2 Ο
Fid to Up Camera Hole Offset2 Ο
Head T-Axis Home Offset Ο HNHeadXY Nozzle 1EA
Nozzle Holder Inspection Ο
Head Block COR Ο
Head Block Ref. Mark Ο
Up Camera Thermal Pos Ο
Head Z Offset Ο HNHeadZ Nozzle 1EA
Head Offset Ο HNHeadXY Nozzle 1EA
SVS Z Position (SVS Camera) Ο HNHeadZ Nozzle 1EA
Height Sensor Offset (Option) Ο
12-46
Cutting-edge Modular Mounter HM520 Administrator's Guide
Multi Function Head (MFH)
Calibration Multi Functional Calibration Tool
Up Camera Scale 1 Ο
Fid to Up Camera Hole Offset1 Ο
Nozzle Holder Inspection Ο
Head Z Offset Ο CN065 Nozzle 1EA
Light Mapping Ο
CNFidMap Nozzle 1EA
CNFixMap Nozzle 1EA
Up Camera Scale 2 Ο CNHeadXY Nozzle 1EA
Fid to Up Camera Hole Offset2 Ο
Head Block Center Ο
Head Block Ref. Mark Ο
Head Offset Ο CNHeadXY Nozzle 1EA
Head T-Axis Offset Ο CNHeadXY Nozzle 1EA
Up Camera Thermal Pos Ο
SVS Z Position (SVS Camera) Ο CN065 Nozzle 1EA
Height Sensor Offset (Option) Ο
12-47
Machine Calibration
图
12.9 “
贴装头
/
相机
/
照明校准
”
对话框
1:
信息框
2: Calibration Item
<校正菜单> 领域
在Calibration Item 选择需要校准的细目。选择特定细目，就会在信息框上依序说
明需要做的事情。按照说明实行就能完成校准。
悬臂选择用箭头键
1F: 显示目前选择的悬臂。
按下箭头键选择需要设定的悬臂。
<目标相机> selection control
选择校准时使用的相机。
<亮度调整> 按钮
设定所选择的相机的照明值。
<目标贴装头> selection control
选择需要实行校准的贴装头。
<Calibrated>复选框
该校正作业完毕后将处于圈选状态。设定为自动执行多个校正作业并按下<
自动校正> 键后执行校正作业时，可以检查是否完成了该校正作业。