Horizon UserManualV6 - 第101页

4. Load the solder paste onto the screen. 5. Lower the front printhead cover. 6. Press the System button. 7. Select Continue (F1). Continue Software Version 6 User Manual 1.85 MACHINE PROGRAMMING STAGE 7 W ARNING SOLDER …

100%1 / 378
STAGE 7
Load Paste, Run a
Product in Step
Mode
If using squeegees with paste dispenser continue with Section Auto Paste
Dispense. If using squeegees without paste dispenser go to Section Manual
Paste Load. If using ProFlow go to Section Run a Product in Step Mode.
Auto Paste Dispense 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Auto Dispense (F1).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Select Exit (F8).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
4. Go to Section Run a Product in Step Mode.
Manual Paste Load 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Manual Load (F2).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Lift the front printhead cover.
1.84 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 7
4. Load the solder paste onto the screen.
5. Lower the front printhead cover.
6. Press the System button.
7. Select Continue (F1).
Continue
Software Version 6 User Manual 1.85
MACHINE PROGRAMMING
STAGE 7
WARNING
SOLDER PASTEAND SOLVENTS. WHEN USING OR HANDLINGAN
Y
SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS' RECOMMENDED SAFETY PRECAUTIONS
MUST BE STRICTLYADHERED TO.
8. Select Exit (F8).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
Run a Product in Step
Mode
1. Select Run (F1).
Run
Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Load a board on to the conveyor.
3. Select Auto Board (F1).
Auto
Board
Manual
Board
Knead
Paste
Exit
4. Select Step (F1).
Step
Open
Cover
Inspect
Setup
Single Exit
5. Select Step (F1).
Step
Open
Cover
Inspect
Setup
Single Exit
6. Select Step (F1).
Step
Open
Cover
Fiducial
Setup
Adjust Search
Step
Search
Reset
Single Exit
7. Select Step (F1).
Step
Open
Cover
Fiducial
Setup
Adjust Search
Step
Search
Reset
Single Exit
1.86 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 7