Horizon UserManualV6 - 第155页
CHAPTER 3 HOST COMMUNICATIONS
If Maintenance Monitoring is disabled, left disabled for several service periods,
either calender or cycle or both, and enabled again:
The next time Run is pressed, the maintenance monitor software determines how
many service periods have been exceeded. From this information it determines
if any higher order servicing has been missed during the disabled period. If a
higher order service would have become due during the disabled period, that
service message is displayed.
ProFlow Hardware Sets whether ProFlow Hardware is fitted.
Fitted; Not Fitted
Pressure Hardware Sets whether pressure feedback hardware is fitted.
Fitted; Not Fitted
Vacuum Hold Time This parameter introduces a time delay between raising the table to flex print
height and initiating Flatten Vac Delay.
Min - 0.0 sec
Max - 5.0 secs
Increment 0.1 sec.
2.20 User Manual Software Version 6
SET PREFERENCES
PREFERENCES
CHAPTER 3
HOST COMMUNICATIONS